5736中文资料Pimoroni Inventor HAT Mini for Raspberry Pi - PIM672数据手册Adafruit Industries规格书

描述 Description

A versatile motor, servo, and audio driver HAT for Raspberry Pi. Bring your mechanical inventions, creations, and contraptions to life! 

Inventor HAT Mini helps transform a Raspberry Pi computer into a robot, prop, kinetic sculpture, creepy automaton, or any other exciting moving thing. Want to drive a couple of fancy motors with encoders (or hook up standard motors with jumper wires)? Yep! Add up to four servos? Sure? Attach a little speaker so you can make noise? No problem!

It's expandable too, with a pass-through header for stacking with other boards and four extra ADC-capable GPIO pins - you could use these to attach analog or digital sensors, or more buttons and LEDs. Speaking of LEDs, they've also managed to fit in 8 addressable RGB LEDs (AKA NeoPixels) ? - that's one for each servo and GPIO/ADC channel so you can use them as indicators.

The folks at Pimoroni wanted Inventor HAT Mini to be fast and easy to get started with, so they've equipped it with convenient pre-soldered pin headers, a Qw/ST connector for plugging in breakouts, and a fully featured Python library with plenty of helpful examples. For power users, they've added an unpopulated external power input and the ability to use higher voltage motors and servos (up to 10V). 

FeaturesNuvoton microcontroller (MS51TC0AE) with built-in 16-bit PWM and 12-bit Analog to Digital Converter (datasheet)4 sets of header pins for connecting 3-pin hobby servos4 sets of header pins for GPIO (all of which are ADC capable)Servo and GPIO pins all have their own power and ground pinsDual H-Bridge motor driver (DRV8833)2 JST-SH connectors (6-pin) for attaching motors with encodersAlternate socket connector for attaching 2 standard (2-pin) motorsPer motor current limiting (425mA)Per motor direction indicator LEDsMAX98357 3.2W I2S mono amplifier2-pin (Picoblade-compatible) connector for attaching speaker8 x addressable RGB LEDs/NeoPixelsUser buttonQw/ST connector for attaching breakoutsPass-through 40-pin headerFully assembled - no soldering requiredPython librarySchematicInventor HAT Mini is compatible with all Raspberry Pi computers with a 40-pin header attached. Mini HATs fit especially neatly on top of Raspberry Pi Zero boards, though.

Raspberry Pi, motors, servos, and speakers are sold separately.

 

Fun with NuvotonA Nuvoton microcontroller handles the nitty gritty of driving the hardware accurately behind the scenes, we also use it for analog to digital conversion and as a handy I/O expander. 

Because most of the Inventor HAT Mini functions are connected to this microcontroller, this HAT only uses a handful of pins on your Pi. With that in mind, we've used a pass-through header so you can stack it easily with other HATs and components that need access to the GPIO.

PinoutConnecting BreakoutsThe Qw/ST connector makes it super easy to connect up Qwiic or STEMMA QT breakouts. If your breakout has a QW/ST connector on board, you can plug it straight in with a JST-SH to JST-SH cable.

Breakout Garden breakouts that don't have a Qw/ST connector can be connected using a JST-SH to JST-SH cable plus a Qw/ST to Breakout Garden adaptor. Want to use multiple Qw/ST breakouts at the same time? Try this adaptor!