Plug-in terminal strip Screw connection, large conductor space

The 322-D-SV is based on our established plug-in terminal strip 322-SV. The clamping space is enlarged for 2x2,5 mm² solid wire without wire protector or 2x1,5 mm² with wire protector. Therefore, this version is most suitable when connections of two wires per pole are required. With the except

文件：92.43 Kbytes 页数：1 Pages

WECO

Plug-in terminal strip Socket with clamping spring, with solder pin

The plug-in terminal strip 322-FBG with a pitch of 10 mm is equipped with a solder pin and designed for the use on PCBs. Due to large pitch and moulding shape, this version is also well suited for applications using higher voltages. Used in combination with a plug-in terminal strip 322-SVW, the

文件：96.56 Kbytes 页数：1 Pages

WECO

Socket terminal strip Screw connection, with solder pin

The socket terminal strip 322-G is available in 10 mm pitch with 1- to 12-pole design and can be easily stripped to the desired number of poles. The flexible polyamide moulding can even be mounted on curved surfaces. Due to large pitch and moulding shape, this version is also well suited for a

文件：105.45 Kbytes 页数：1 Pages

WECO

Screw/solder terminal strip Screw/solder tag connection

The screw/solder terminal strip 322-LFS in 10 mm pitch was designed for larger cross-sections than version 302-LF-DS. It is available with 1 to 12 poles. Mouldings of this type are open on the solder tag side but they can be connected safe-to-touch as 2- and 3-pole version with cover caps A-323

文件：103.86 Kbytes 页数：1 Pages

WECO