C6Amodul 24 port 180°M 1RU stainless steel

Product specification • 19 inch 1RU stainless steel module frame with 24 individual modules C6Amodul 180° • certified to GHMT Cat.6A re-embedded PVP • Cat.6A component test according to ISO/IEC 11801, DIN EN 50173-1, ANSI/TIA-568.2-D and IEC 60603-7-51, GHMT certified • compliance with class E

文件：442.31 Kbytes 页数：8 Pages

METZ

REGplus IP20 E-DAT modul

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with individual E-DAT modul RJ45 module • cable feed 45° from the top, plug direction 45° downwards • Cat.6A component test acc

文件：333.76 Kbytes 页数：8 Pages

METZ

REGplus IP20 C6Amodul 270°M

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with C6Amodul 270° RJ45 individual module • cable feed 45° from the bottom, plug direction 45° downwards • certified to GHMT Ca

文件：254.06 Kbytes 页数：8 Pages

METZ

Modul 19 inch module frame 1RU 24 Port light gray unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of silver anodized aluminum • plastic module support with dust protection covers (other colors available as accessory), detachable to the front • integrated cable support with opt

文件：2.57455 Mbytes 页数：7 Pages

METZ

Modul 19 inch module frame 1RU 24 port black unequipped, shielded

Product specification • 19 inch 1RU module frame for 24 individual modules, Modul design • module frame front made of black anodized aluminum • plastic module support with dust protection covers (other colors available as accessories), detachable to the front • integrated cable support with op

文件：3.10569 Mbytes 页数：6 Pages

METZ

Modul 19 inch module frame 1RU 24 port stainless steel unequipped

Product specification • 19 inch 1RU stainless steel module frame for 24 individual modules, Modul design • optional strain relief on patch panel using cable ties • grounding bolt M6 x 10 with nut and lock washer • incl. 30 cm grounding cable • all fully shielded modules are connected by means

文件：642.42 Kbytes 页数：6 Pages

METZ

E-DAT modul REG 1 port IP20 light gray

Product specification • termination unit for mounting on TH35 rails to DIN EN 60715 in electrical distribution panels for home and industrial installations • equipped with individual E-DAT modul RJ45 module • cable feed 45° from the top, plug direction 45° downwards • compliance with class EA

文件：959.17 Kbytes 页数：7 Pages

METZ

Modul REGplus IP20 light gray unequipped

Product specification • unequipped termination unit for mounting on TH35 rail to DIN EN 60715 • for one individual module in Modul design • variable cable feed 45° from the top or bottom, plug direction 45° downwards • width of 1HP allows mounting up to 12 REG in standard electrical distributi

文件：245.73 Kbytes 页数：6 Pages

METZ

REGplus IP20 E-DAT modul coupler 180°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

文件：244.16 Kbytes 页数：7 Pages

METZ

REGplus IP20 E-DAT modul coupler 90°

Product specification • equipped with E-DAT modul RJ45 coupler • plug direction 45° downwards • compliance with class EA according to ISO/IEC 11801, DIN EN 50173-1 • suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT • width of 1HP allows mounti

文件：243.01 Kbytes 页数：7 Pages

METZ