ZXLD1352中文资料Led-drivers数据手册Diodes规格书

描述 Description

The ZXLD1352 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 7V and 30V and provides an externally adjustable output current of up to 350mA. Depending upon supply voltage and external components, this can provide up to 8 watts of output power. The ZXLD1352 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current. Output current can be adjusted above, or below the set value, by applying an external control signal to the 'ADJ' pin. The ADJ pin will accept either a DC voltage or a PWM waveform. DC voltages between 0.3V and 2.5V allow adjustment of output current from 25% to 200% of nominal. 1000:1 adjustment of output current is possible using PWM control. Applying a voltage of 0.2V or lower to the ADJ pin turns the output off and switches the device into a low current standby state. The device is assembled in a TSOT25 pin package.

特性 Features

•Simple low parts count
•Internal 30V NDMOS switch
•350mA output current
•Single pin on/off and brightness control using DC voltage or PWM
•1000:1 PWM dimming range
•Soft-start
•High efficiency (up to 95%)
•Wide input voltage range: 7V to 30V
•40V transient capability
•Output shutdown
•Up to 1MHz switching frequency
•Inherent open-circuit LED protection
•Typical 4% output current accuracy

应用 Application

•Low voltage halogen replacement LEDs
•Automotive lighting
•Low voltage industrial lighting
•LED back-up lighting
•Illuminated signs

简介

ZXLD1352属于集成电路（IC）的LED驱动器。由制造生产的ZXLD1352LED 驱动器器件属于 LED 驱动器电源管理集成电路 (PMIC) 系列，可通过标称固定电压的电源为负载（通常为发光二极管）提供电流，并且电流可控。它与用于电压调节的类似产品的主要区别在于，这类器件提供较低的反馈电压（以提高系统能效），而且通常可对器件工作点进行外部控制，可在照明应用中用于实现调光功能。