ZXGD3005E6中文资料25V, 10A, Gate Driver, SOT26数据手册Diodes规格书

描述 Description

The ZXGD3005E6 is a high-speed non-inverting single gate driver capable of driving up to 10A into a MOSFET or IGBT gate capacitive load from supply voltages up to 25V. With propagation delay times down to <10ns and correspondingly rise/fall times of <20ns. This gate driver ensures rapid switching of the MOSFET or IGBT to minimize power losses and distortion in high current switching applications. It is ideally suited to act as a voltage buffer between the typically high output impedances of a controller IC and the effectively low impedance on the gate of a power MOSFET or IGBT during switching. Its low input voltage requirement and high current gain allows high current driving from low voltage controller ICs. The ZXGD3005E6 has separate source and sink outputs that enables the turn-on and turn-off times of the MOSFET or IGBT to be independently control°C. In addition, the wide supply voltage range allows full enhancement of the MOSFET or IGBT to minimize on-state losses and permits +15V to -5V gate drive voltage to prevent dV/dt induced false triggering of IGBTs. The ZXGD3005E6 has been designed to be inherently rugged to latch-up and shoot-through issues. The optimized pin-out SOT26 package eases board layout, enabling reduced parasitic inductance of traces.

应用 Application

Power MOSFET and IGBT Gate Driving in:

\t
\t\tSynchronous switch-mode power supplies
\t
\t\tPower Factor Correction (PFC) in power supplies
\t
\t\tSecondary side synchronous rectification
\t
\t\tPlasma Display Panel power modules
\t
\t\t1, 2 and 3-phase motor control circuits
\t
\t\tAudio switching amplifier power output stages
\t
\t\tSolar inverters


\t\t\t\t\t\t

\t\t\t\t\t\t


\t\t\t\t\t
\t\t\t\t
\t\t\t




\t\t\t
\t\t\t\t
\t\t\t\tProduct Specifications

简介

ZXGD3005E6属于集成电路（IC）的栅极驱动器。由制造生产的ZXGD3005E6栅极驱动器栅极驱动器电源管理集成电路 (PMIC) 可用于提供隔离、放大、参考位移、自举或其他必要功能，这些功能可将来自电源转换应用中控制设备的信号连接到电源被控制通过的半导体设备（通常为 FET 或 IGBT）。任何特定设备提供的确切功能各不相同，但与它适合驱动的半导体配置相关。