YDA142中文资料雅马哈数据手册PDF规格书

■ Overview

YDA142 (D-3D) is a 12V single supply voltage, high-efficiency digital audio power amplifier IC. An audio power amplifier with a maximum output of 9.5W (RL=8Ω) × 2ch or 19W (RL=4Ω) × 1ch can be configured with one chip.

YDA142 has a “Pure Pulse Direct Speaker Drive Circuit” that directly drives speakers while reducing distortion of a pulse output signal and reducing noise on a signal, and it realizes the highest standard low distortion rate characteristics and low noise characteristics as compared with those of digital amplifier ICs in the same class. The circuit allows you to design a circuit with as few external parts as possible depending on use conditions because any filter is no longer required

■ Features

• Maximum Output

9.5 W×2ch (VDDP=12.0V, RL=8Ω, THD+N=10, MONO=L, GAIN[2:0]=H,L,L)

19 W×1ch (VDDP=12.0V, RL=4Ω, THD+N=10, MONO=H, GAIN[2:0]=H,L,L)

• Efficiency

90 (VDDP=12.0V, RL=8Ω, Po=9.5W)

• Distortion Rate (THD+N)

0.05 (VDDP=12.0V, RL=8Ω, Po=1.0W, GAIN[2:0]=H,L,L)

• S/N Ratio

100dB (VDDP=12.0V, RL=8Ω, Po=9.5W, GAIN[2:0]=H,L,L)

• Channel Separation Ratio

-78dB (VDDP=12.0V)

• Supply voltage Range

9.0V to 13.5V

• 3-wire Digital Signal Input

Fs: 32kHz/44.1kHz or 48kHz, Bits: 16bit or 18bit

• Gain Setting Function with GAIN[2:0] and GAINA terminal

• Power-down Function with SLEEPN terminal

• Output Mute Function with MUTEN terminal

• Monaural Output Function with MONO terminal

• Protection Functions (Over-current Protection, Thermal Protection, Clock Stop protection, Under-voltage Malfunction

Prevention, DC Input Detection)

• Pop-noise Reduction Function

• Digital Input/BTL(Bridge-Tied Load) output

• Package

Lead-free 52-pin SSOP (YDA142-EZ)