XTAD5112IRGER中文资料德州仪器数据手册PDF规格书

1 Features

• DAC performance:

– DAC to Line Out Dynamic Range: 106 dB

– DAC to HP Out Dynamic Range: 102 dB

– THD+N: –95 dB

• Head Phone/Line Out output voltage:

– Differential, 2-VRMS full-scale

– Single-ended, 1-VRMS full-scale

• DAC sample Rates (fs) = 8KHz to 768KHz

• Analog Input to Output By-pass

• Battery Protection

• Signal Distortion Limiter

• Thermal Foldback

• Low Latency Filter Selection

• Programmable HPF and Biquad Filters

• I2C & SPI Control Interface

• Audio Serial Interface

– Format: TDM, I2S or Left Justified

– Word Length: 16,20,24 or 32 Bits

• Programmable PLL for Flexible Clocking

• Low Power Modes

– TBD mW for Playback

• Single Supply Operation: 1.8V or 3.3V

• I/O Supply Operation: 1.2V or 1.8V or 3.3V

2 Applications

• Telematics control unit

• Automotive head unit

• Digital cockpit processing unit

• Rear seat entertainment

• Reconfigurable instrument cluster

3 Description

The TAD5112 is a Stereo 2VRMS DAC. The TAD5112

supports both differential and Single Ended input

and output. DAC Output can be configured for

either Line Out or Head Phone Load. TAD5112 can

drive upto TBD mW into a Headphone Load. The

TAD5112 integrates programable channel gain, digital

volume control, a low-jitter phase-locked loop (PLL),

a programmable high-pass filter (HPF), programmable

EQ and biquad filters, low-latency filter modes, and

allows for sample rates up to 768 kHz. The TAD5112

supports Analog Input to Output Bypass option. Data

from Analog-In and Digital-In can be mixed inside the

device as well. The TAD5112 supports time-division

multiplexing (TDM), I2S, or left-justified (LJ) audio

formats, and can be controlled with I2C or SPI. These

integrated high-performance features, along with a

single supply operation, make TAD5112 an excellent

choice for space-constrained audio applications.