XS3A4053PW中文资料Triple low-ohmic single-pole double-throw analog switch数据手册Nexperia规格书

描述 Description

The XS3A4053 is a triple low-ohmic single-pole double-throw analog switch, suitable for use as an analog or digital multiplexer/demultiplexer. Each switch has a digital select input (nS), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ). All three switches share an enable input (E). A digital enable pin E is common to all switches.When E is HIGH, the switches are turned off.
Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise and fall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levels in 3.3 V applications without significant increase in supply current ICC. This makes it possible for the XS3A4053 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the need for logic level translation. The XS3A4053 allows signals with amplitude up to VCC to be transmitted from nZ to nY0 or nY1; or from nY0 or nY1 to nZ. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.

特性 Features

• Wide supply voltage range from 1.4 V to 4.3 V
• 1.6 Ω (typical) at VCC = 1.4 V
• 0.55 Ω (typical) at VCC = 2.3 V
• 0.5 Ω (typical) at VCC = 4.3 V
• Break-before-make switching
• ESD protection:
• HBM ANSI/ESDA/JEDEC JS-001 exceeds 4000 V
• IEC61000-4-2 contact discharge exceeds 8000 V for switch ports
• CMOS low-power consumption
• 1.8 V control logic at VCC = 3.6 V
• Very low supply current, even when input is below VCC
• Specified from -40 °C to +85 °C and from -40 °C to +125 °C

应用 Application

• Appliances
• Medical Equipment
• Audio Routing/Switching
• Test and Measurement