XR3088X

High Output 18V Tolerant RS-485/RS-422 +5V Transceivers; ·40% Higher SNR (Signal-to-Noise Ratio) compared to other RS-485 devices (2.1V vs. 1.5V) \n·±18V Fault Tolerance on Analog Bus pins \n·2.1V Driver Output (Profibus Compliant) \n·Robust ESD (ElectroStatic Discharge) Protection:·±15kV IEC 61000-4-2 Air Gap Discharge \n·±8kV IEC 61000-4-2 Contact Discharge \n·±15kV Human Body Model \n·±4kV Human Body Model on non-bus pins\n\n·+4.5V to +5.5V Operation (5V ±1 10%) \n·300µA Idle Current, 1nA Shutdown Current \n·Enhanced Receiver Fail-Safe Protection for Open, Shorted, or Terminated but Idle Data Lines \n·Hot-Swap Glitch Protection on DE and RE Pins \n·Driver Short Circuit Current Limit and Thermal Shutdown for Overload Protection \n·1/8th Unit Load Allows up to 256 Devices on Bus \n·Industry Standard 8 and 14 NSOIC Packages\n;

The XR3080-88X family of high performance RS-485/422devices are designed for improved performance in noisy industrial environmentsand increased tolerance to system faults.\nThe analog bus pins can survive direct shorts up to ±18V, and are protected against ESD events up to ±15kV. The Profibus compliant differential output delivers 40% higher SNR than standard RS-485/422 devices, affording additional noise margin or extended cable lengths.\nThe receivers include full fail-safe circuitry, guaranteeing a logic-high receiver output when the receiver inputs are open, shorted, or undriven. The receiver input impedance is at minimum 96kΩ (1/8 unit load), allowing up to 256 devices on the bus while preserving the full signal margin.\nThe drivers are protected by short circuit detection as well as thermal shutdown, and maintain high impedance in shutdown or when powered off. The XR3080-85X drivers are slew limited for reduced EMI and error-free communication over long or unterminated data cables.\nThe devices with DE and RE pins include hot swap circuitry to prevent false transitions on the bus during powerup or live insertion, and can enter a 1nA low current shutdown mode for extreme power savings.\nThe transceivers draw less than 600µA from a +5.0V supply, and typically only 300µA when idling with the receivers active.\nFor technical support or help choosing a product please email Exar’s Serial Technical Support group at:  serialtechsupport@exar.com.\n

XR3088XED-F

HIGH OUTPUT 18V TOLERANT RS-485/RS-422 5V TRANSCEIVERS

XR3088XID-F

HIGH OUTPUT 18V TOLERANT RS-485/RS-422 5V TRANSCEIVERS

XR3088XID-F

Package：8-SOIC（0.154"，3.90mm 宽）；包装：卷带（TR） 类别：集成电路（IC） 驱动器，接收器，收发器 描述：IC TRANSCEIVER HALF 1/1 8SOIC

ETC

XR3088XIDTR-F

Package：8-SOIC（0.154"，3.90mm 宽）；包装：管件 类别：集成电路（IC） 驱动器，接收器，收发器 描述：IC TRANSCEIVER HALF 1/1 8SOIC

ETC

3088

3.4KHzNotchFrequency2.44KHztypical3dBBandwidthHighAttenuationinNotch

3088

ThickPanelSnapBushings

3088A

Inst,1Pr#18StrBC,PVC-NYLInsE1,OS,BlkPVCJkt,600VTC150VNPLF90CDry/Wet

ProductDescription ULInstrumentation,1Pair18AWG(7x26)BareCopper,PVC-NYLInsulationE1ColorCode,OverallBeldfoil®Shield,BlackPVCOuterJacket,600VTC 150VNPLF90CDry/WetSUNRESDIRBUR

ADM3088

High-Speed(10Mbps),Fail-Safe,RS-485/RS-422TransceiverswithSlew-Rate-Limitingand5kVESDProtection

ADM3088AN

High-Speed(10Mbps),Fail-Safe,RS-485/RS-422TransceiverswithSlew-Rate-Limitingand5kVESDProtection