XR22804中文资料Hi-Speed USB to 10/100 Ethernet Bridge w/4-CH UARTs数据手册MaxLinear规格书

描述 Description

The XR22804 is a Hi-Speed USB 2.0 compound device with an embedded hub and 7 downstream USB functions: 10/100 Ethernet MAC and PHY, 4 UARTs, multi-master capable I2C controller, and an Enhanced Dedicated GPIO Entity (EDGE) controller.
The upstream USB interface has an integrated USB 2.0 PHY and device controller that is compliant with both Hi-Speed (480Mbps) and Full-Speed (12Mbps) USB 2.0. The vendor ID, product ID, power mode, remotewakeup support and maximum power consumption are amongst the values that can be programmed using the on-chip One-Time Programmable (OTP) memory.
The Ethernet 10/100 MAC and PHY are compliant with IEEE 802.3 and supports auto-negotiation, auto-MDIX, checksum offload, auto-polarity correction in 10Base-T and remote wakeup capabilities.
The enhanced UART has a maximum data rate of 15 Mbps. Using a fractional baud rate generator, any baud rate between 300 bps and 15 Mbps can be accurately generated. In addition, the UART has a large 1024-byte TX FIFO and RX FIFO to optimize the overall data throughput for various applications. The automatic RS485 control feature simplifies both the hardware and software for half-duplex RS-485 applications. If required, the multidrop (9-bit) mode feature further simplifies typical multidrop applications by enabling / disabling the UART receiver depending on the address byte received.
The multi-master capable I2C controller and EDGE controller (up to 32 GPIOs) can be accessed via the USB HID interface. The EDGE pins or I2C interface can be used for controlling and monitoring other peripherals. Up to 2 EDGE pins can be configured as a PWM generator.
For UART technical support or to obtain an IBIS model for this product, please email Exar's UART Technical Support group.

特性 Features

·USB 2.0 Compliant Interface
·10/100 Ethernet MAC and Phy
·Enhanced UART
·Half-Duplex Mode
·I2C Multi-master
·Enhanced Dedicated GPIO Entity (EDGE)
·Single +5.0V Power Supply Input
·Regulated +3.3V Output Power
·Single 25MHz Crystal
·±15kV HBM ESD Protection on USB data pins
·±8kV HBM ESD Protection on all other pins

应用 Application

·USB to Ethernet Dongles
·POS Terminals
·Test Instrumentation
·Networking
·Factory Automation and Process Controls
·Industrial Applications