XMC1402-Q040X0064中文资料英飞凌数据手册PDF规格书

The XMC1400 devices are members of the XMC™1000 Family of microcontrollers based

on the ARM Cortex-M0 processor core. The XMC1400 series addresses the real-time

control needs of motor control and digital power conversion. It also features peripherals

for LED Lighting applications and Human-Machine Interface (HMI).

Features

CPU subsystem

• 32-bit ARM Cortex-M0 CPU Core

– 0.84 DMIPS/MHz (Dhrystone 2.1) at

48 MHz

• Nested Vectored Interrupt Controller

• 64 interrupt nodes

• MATH coprocessor

– 24-bit trigonometric calculation

(CORDIC)

– 32-bit divide operation

• 2x4 channels ERU for event

interconnections

On-Chip Memories

• 8 Kbyte ROM

• 16 Kbyte SRAM (with parity)

• up to 200 Kbyte Flash (with ECC)

Supply, Reset and Clock

• 1.8 V to 5.5 V supply with power on reset

and brownout detector

• On-chip clock monitor

• External crystal oscillator support (32 kHz

and 4 to 20 MHz)

• Internal slow and fast oscillators without

the need of PLL

System Control

• Window watchdog

• Real time clock module

• Pseudo random number generator

Communication Peripherals

• Four USIC channels, usable as

– UART (up to 12 Mb/s)

– single-SPI (up to 12 Mb/s)

– double-SPI (up to 2 × 12 Mb/s)

– quad-SPI (up to 4 × 12 Mb/s)

– IIC (up to 400 kb/s)

– IIS (up to 12 Mb/s)

– LIN interfaces (20kb/s)

• LEDTS in Human-Machine interface

– up to 24 touch pads

– drive up to 144 LEDs

• MultiCAN+, Full-CAN/Basic-CAN with 2

nodes, 32 message objects (up to

1 MBaud)

Analog Frontend Peripherals

• A/D Converters (up to 12 analog inputs)

– 2 sample and hold stages

– fast 12-bit ADC (up to 1.1 MS/s),

adjustable gain

– 0 V to 5.5 V input range

• Up to 8 channels out of range

comparators

• Up to 4 fast analog comparators

• Temperature Sensor

Industrial Control Peripherals

• 2x4 16-bit 96 MHz CCU4 timers for signal

monitoring and PWM

• 2x4 16-bit 96 MHz CCU8 timers for

complex PWM, complementary high/low

side switches and multi phase control

• 2x POSIF for hall and quadrature

encoders, motor positioning

• 9 channel BCCU (brightness and color

control) for LED lighting applications

Up to 56 Input/Output Ports

• 1.8 V to 5.5 V capable

• up to 8 high current pads (50 mA sink)

On-Chip Debug Support

• 4 breakpoints, 2 watchpoints

• ARM serial wire debug, single-pin debug

interfaces

Programming Support

• Single-pin bootloader

• Secure bootstrap loader SBSL (optional)

Packages

• TSSOP-38 (9.7 × 6.4 mm2)

• VQFN-40/48/64 (5×5/7×7/8×8 mm2)

• LQFP-64 (12 × 12 mm2)

Tools

• Free DAVE™ toolchain with low

level drivers and apps