XDLPC231SZEKQ1中文资料德州仪器数据手册PDF规格书

1 Features

• Qualified for automotive applications

• AEC-Q100 qualified with the following results:

– Device temperature grade 2: –40°C to +105°C

ambient operating temperature

– Device HBM ESD classification level 2

– Device CDM ESD classification level C4B

• Functional Safety Quality-Managed

– Documentation available to aid ISO 26262

functional safety system design up to ASIL-B

• DMD display controller supporting:

– DLP553xS-Q1 and DLP462xS-Q1 automotive

interior display chipsets

• Video processing

– Scales input image to match DMD resolution

– Bezel adjustment up ±50 vertical image

position and ±10 horizontal reducing the need

for mechanical alignment (HUD)

– Support for pixel doubling or quadrupling to

allow low resolution video input

– Gamma correction

• Embedded processor with error correction (ECC)

– On-chip diagnostic and self-test capability

– System diagnostics including temperature

monitoring, device interface monitoring, and

photodiode monitoring

– Integrated management of smooth dimming

– Configurable GPIO

• No external RAM required, internal SRAM for

image processing

• 600-MHz sub-LVDS DMD interface for low power

and emission

• Spread spectrum clocking for reduced EMI

• Video input interface

– Single OpenLDI (FPD-Link I) port up

to 110 MHz

– 24-bit RGB parallel interface up to 110 MHz

• Configurable host control interface

– Serial peripheral interface (SPI) 10 MHz

– I2C (400 kHz)

– Host IRQ signal to provide real-time feedback

for critical system errors

• Interface to TPS99000S-Q1 system management

and illumination controller

2 Applications

• Wide field of view and augmented reality head-up

display (HUD)

• Digital cluster, navigation, and infotainment

windshield displays

3 Description

The DLPC23xS-Q1 DMD Display Controller for

automotive applications is used in chipsets for interior

and exterior display applications with a functional

safety requirement (such as augmented reality

HUDs and windshield clusters). The DLP553xS-Q1

chipset includes a 0.55” DMD and the DLP462xS-Q1

chipset includes a 0.46 DMD. Both chipsets also

include the TPS99000S-Q1 System Management and

Illumination controller. The DLPC23xS-Q1 integrates

an embedded processor with error code correction

(SECDED ECC), enabling host control and real-time

feedback, on-chip diagnostics, and system monitoring

functions. On-chip SRAM is included to remove

the need for external DRAM. Combined with the

TPS99000S-Q1, the DLPC23xS-Q1 supports high

dynamic range dimming of over 5000:1 for HUD

applications. Sub-LVDS 600-MHz DMD interface

allows high DMD refresh rates to generate seamless

and brilliant digital images, while simultaneously

reducing radiated emissions.

To aid in the design and manufacture of automotive

qualified projectors based on DLP technology,

there are a number of established optical module

manufacturers and design houses that can be

leveraged to support your design.