XC9226A12CMR中文资料特瑞仕数据手册PDF规格书

■GENERAL DESCRIPTION

The XC9225/XC9226/XC9227 series is a group of synchronous-rectification type DC/DC converters with a built-in 0.6Ω

P-channel driver transistor and 0.7ΩN-channel switching transistor, designed to allow the use of ceramic capacitors. The

ICs enable a high efficiency, stable power supply with an output current of 500mA (A~D series) and 600mA (E~H series) to be

configured using only a coil and two capacitors connected externally. Minimum operating voltage is 2.0V~6.0V (A~D series),

4.5V~5.5V (E~H series). Output voltage is internally programmable in a range from 0.9V to 4.0V (A~D series) and 3.0~4.0V

(E~H series) in increments of 0.05V (accuracy: ±2.0%). With the built-in oscillator, oscillation frequency is selectable from

600kHz and 1.2MHz to make available the frequency best suited to your particular application. As for operation mode, the

XC9225 series is PWM control, the XC9226 series is automatic PWM/PFM switching control and the XC9227 series can be

manually switched between the PWM control mode and the automatic PWM/PFM switching control mode, allowing fast

response, low ripple and high efficiency over the full range of load (from light load to high output current conditions).

The soft start and current control functions are internally optimized. During standby, all circuits are shutdown to reduce

current consumption to as low as 1.0μA or less. With the built-in UVLO (Under Voltage Lock Out) function, the internal

P-channel driver transistor is forced OFF when input voltage becomes 1.4V or lower. Two types of package, SOT-25

(250mW) and USP-6B (100mW), are available.

■APPLICATIONS

●Mobile phones (PDC, GSM, CDMA, IMT2000 etc.)

●Bluetooth equipment

●PDAs, Portable communication modem

●Portable games

●Cameras, Digital cameras

●Cordless phones

●Notebook computers