X9C303中文资料Logarithmic Digitally Controlled Potentiometer (XDCP), Terminal Voltage 5V, 100 Taps, Log Taper数据手册Renesas规格书

描述 Description

The Intersil X9C303 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a three-wire interface.
The resistor array is composed of 99 resistive elements. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation.
The device can be used as a three-terminal potentio-meter or as a two-terminal variable resistor in a wide variety of applications ranging from control, to signal processing, to parameter adjustment. Digitally-controlled potentiometers provide three powerful application advantages;
the variability and reliability of a solid-state potentiometer, (2) the flexibility of computer-based digital controls, and (3) the use of nonvolatile memory for potentiometer settings retention.

特性 Features

• Solid-state potentiometer
• Three-wire serial interface
• 100 wiper tap points
• Wiper position stored in nonvolatile memory and recalled on power-up
• 99 resistive elements, log taper
• Temperature compensated
• End to end resistance, 32kΩ ±15%
• Terminal voltages, ±5V
• Low power CMOS
• VCC = 5V
• Active current, 3mA max.
• Standby current, 750µA max.
• High reliability
• Endurance, 100,000 data changes per bit
• Register data retention, 100 years
• Packages
• 8 Ld TSSOP
• 8 Ld SOIC
• 8 Ld PDIP