E2POT??Nonvolatile Digital Potentiometer

DESCRIPTION The Xicor X9C102/103/104/503 is a solid state nonvolatile potentiometer and is ideal for digitally controlled resistance trimming. FEATURES • Compatible with X9102/103/104/503 • Low Power CMOS —VCC = 5V —Active Current, 3mA Max —Standby Current, 500µA Max • 99 Resis

文件：83.59 Kbytes 页数：15 Pages

XICOR

Xicor Inc.

Digitally Controlled Pot (XDCP)

The X9C102, X9C103, X9C104, X9C503 are Intersils’ digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. Features • Solid-State Potentiomete

文件：257.88 Kbytes 页数：11 Pages

INTERSIL

Digitally Controlled Potentiometer

The X9C102, X9C103, X9C104, X9C503 are Intersils’ digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. Features • Solid-State Potentiomete

文件：240.71 Kbytes 页数：10 Pages

INTERSIL

Digitally Controlled Potentiometer

The X9C102, X9C103, X9C104, X9C503 are Intersils’ digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a

文件：237.95 Kbytes 页数：10 Pages

INTERSIL

Digitally Controlled Potentiometer (XDCP??

Digitally Controlled Potentiometer (XDCP™) The X9C102, X9C103, X9C104, X9C503 are Intersils’ digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface.

文件：522.59 Kbytes 页数：10 Pages

RENESAS

瑞萨

Digitally Controlled Potentiometer

文件：240.71 Kbytes 页数：10 Pages

INTERSIL

Digitally Controlled Potentiometer (XDCP??

文件：240.71 Kbytes 页数：10 Pages

INTERSIL

DIGITAL POTENTIOMETERS

文件：1.77378 Mbytes 页数：8 Pages

INTERSIL

Digitally Controlled Potentiometer (XDCP™)

The X9C102, X9C103, X9C104, X9C503 are Intersil's digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a resisto • Solid-State Potentiometer\n• Three-Wire Serial Interface\n• 100 Wiper Tap Points\n• Wiper Position Stored in Non-volatile Memory and Recalled on Power-up\n• 99 Resistive Elements\n• Temperature Compensated\n• End-to-End Resistance, ±20%\n• Terminal Voltages, ±5V\n• Low Power CMOS\n• VCC = 5V\n;

Renesas

瑞萨

Digitally Controlled Potentiometer

The X9C102, X9C103, X9C104, X9C503 are Intersils’ digitally controlled (XDCP) potentiometers. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface. The potentiometer is implemented by a

文件：237.95 Kbytes 页数：10 Pages

INTERSIL