X9420中文资料Single Digitally Controlled (XDCP™) Potentiometer数据手册Renesas规格书

描述 Description

Support is limited to customers who have already adopted these products.

The X9420 integrates a single digitally controlled potentiometers (XDCP) on a monolithic CMOS integrated microcircuit. The digitally controlled potentiometer is implemented using 63 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The position of the wiper on the array is controlled by the user through the SPI bus interface. The potentiometer has associated with it a volatile Wiper Counter Register (WCR) and 4 nonvolatile Data Registers (DR0:DR3) that can be directly written to and read by the user. The contents of the WCR controls the position of the wiper on the resistor array through the switches. Power-up recalls the contents of DR0 to the WCR. The XDCP can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing.

特性 Features

• Solid-State Potentiometer
• SPI Serial Interface
• Register Oriented Format
• Direct read/write/transfer wiper positions
• Store as many as four positions per potentiometer
• Power Supplies
• VCC = 2.7V to 5.5V
• V+ = 2.7V to 5.5V
• V- = -2.7V to -5.5V
• Low Power CMOS
• Standby current < 1µA
• High Reliability
• Endurance-100,000 data changes per bit per register
• Register data retention-100 years
• 8-bytes of Nonvolatile EEPROM Memory
• 10kΩ or 2.5kΩ Resistor Arrays
• Resolution: 64 Taps Each Pot
• 14 Ld TSSOP and 16 Ld SOIC Packages
• Pb-Free Plus Anneal Available (RoHS Compliant)