X9317中文资料Digitally Controlled Potentiometer (XDCP™)数据手册Renesas规格书

描述 Description

The X9317 is a digitally controlled potentiometer (XDCP™). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer for voltage control or as a two-terminal variable resistor for current control in a wide variety of applications.

特性 Features

• Solid-State Potentiometer
• 3-Wire Serial Up/Down Interface
• 100 Wiper Tap Points
• Wiper Position Stored in Nonvolatile Memory and Recalled on Power-up
• 99 Resistive Elements
• Temperature Compensated
• End-to-end Resistance Range ±20%
• Low Power CMOS
• VCC = 2.7V to 5.5V, and 5V ±10%
• Standby Current TOTAL Values = 10kΩ, 50kΩ, 100kΩ
• Packages
• 8 Ld SOIC, TSSOP, and MSOP
• Pb-Free (RoHS Compliant)

应用 Application

• LCD Bias Control
• DC Bias Adjustment
• Gain and Offset Trim
• Laser Diode Bias Control
• Voltage Regulator Output Control