SPI Serial E2PROM with Block LockTM Protection

DESCRIPTION The X25040 is a CMOS 4096-bit serial E2PROM, internally organized as 512 x 8. The X25040 features a Serial Peripheral Interface (SPI) and software protocol allowing operation on a simple three-wire bus. The bus signals are a clock input (SCK) plus separate data in (SI) and data out

文件：117.49 Kbytes 页数：14 Pages

ICMIC

SPI Serial E2PROM with Block LockTM Protection

DESCRIPTION The X25040 is a CMOS 4096-bit serial E2PROM, internally organized as 512 x 8. The X25040 features a Serial Peripheral Interface (SPI) and software protocol allowing operation on a simple three-wire bus. The bus signals are a clock input (SCK) plus separate data in (SI) and data out

文件：117.49 Kbytes 页数：14 Pages

ICMIC

SPI Serial E2PROM with Block LockTM Protection

DESCRIPTION The X25040 is a CMOS 4096-bit serial E2PROM, internally organized as 512 x 8. The X25040 features a Serial Peripheral Interface (SPI) and software protocol allowing operation on a simple three-wire bus. The bus signals are a clock input (SCK) plus separate data in (SI) and data out

文件：117.49 Kbytes 页数：14 Pages

ICMIC

4K 512 x 8 Bit SPI Serial E2PROM with Block Lock™ Protection

DESCRIPTION\nThe X25040 is a CMOS 4096-bit serial E2PROM, internally organized as 512 x 8. The X25040 features a Serial Peripheral Interface (SPI) and software protocol allowing operation on a simple three-wire bus. The bus signals are a clock input (SCK) plus separate data in (SI) and data out (SO) • 1MHz Clock Rate\n• SPI Modes (0,0 & 1,1)\n• 512 X 8 Bits\n—4 Byte Page Mode\n• Low Power CMOS\n—150µA Standby Current\n—3mA Active Current\n• 2.7V To 5.5V Power Supply\n• Block Lock Protection\n—Protect 1/4, 1/2 or all of E2PROM Array\n• Built-in Inadvertent Write Protection\n—Power-Up/Power-Down ;

ICmic