X-NUCLEO-S2868A1

Sub-1 GHz 868 MHz RF expansion board based on S2-LP radio for STM32 Nucleo; Based on S2-LP radio\nS2-LP narrow band ultra-low power sub-1 GHz transceiver tuned for 860 - 940 MHz frequency band\nProgrammable RF output power up to +16 dBm\nModulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK and ASK\nAir data rate from 0.1 to 500 kbps\nUltra-low power consumption: 7 mA RX and 10 mA TX at +10 dBm\nIEEE 802.15.4g hardware packet support with whitening, FEC, CRC and dual SYNC word detection\nRX and TX 128 byte FIFO buffers\nSupport to wireless M-Bus\nExcellent performance of receiver sensitivity (up to -130 dBm)\nAutomatic acknowledgement, retransmission and timeout protocol engine\nCompatible with STM32 Nucleo boards\nCompatible with Arduino UNO R3 connectors\nSupport to SMD and SMA antennas\nBALF-SPI2-01D3 IPD balun for matching network and harmonics filter\nSigfox compatible\nSample firmware for P2P communication\n6LoWPAN compatible thanks to STM32Cube\nRoHS compliant\n;

The X-NUCLEO-S2868A1 expansion board is based on the S2-LP radio and operates in the 868 MHz ISM frequency band.\nThe expansion board is compatible with ST morpho and Arduino UNO R3 connectors.\nThe X-NUCLEO-S2868A1 interfaces with the STM32 Nucleo microcontroller via SPI connections and GPIO pins. You can change some of the GPIOs by mounting or removing the resistors.\n

X-NUCLEO-S2868A1

包装：散装 功能：收发器 类别：开发板，套件，编程器 评估板 - 扩展板，子卡 描述：SUB-1 GHZ 868 MHZ RF EXPANSION B