WSP7110硫化氢气体传感器

WSP7110型硫化氢气敏元件采用先进的平面生产工艺，在微型Al2O3陶瓷基片上形成加热器和金属氧化物半导体气敏材料，用电极引线引出，封装在金属管座、管帽内。当有被检测气体存在时，空气中该气体的浓度越高，气体传感器的电导率就越高。使用简单的电路即可将这种电导率的变化转换为与气体浓度对应的输出信号。 ·11对硫化氢灵敏度高\n\n·22响应恢复快、低功耗、检测电路简单\n\n·33稳定性好、寿命长;

Winsen

炜盛科技

Common Mode EMI Inductors

[J.W.Miller] Special Features •Reduce conductive EMI emission •High current capacity •High impedance at low frequency •Dielectric strength 3750VRMS •Coil wound on VW-1 rated plastic cased ferrite core •Operating temperature -55 to +105°C

文件：36.35 Kbytes 页数：1 Pages

ETCList of Unclassifed Manufacturers

未分类制造商

3M??Tamper-Evident Label Materials

文件：553.53 Kbytes 页数：4 Pages

3M

Common Mode EMI Chokes

Special Features • Dual winding • Low radiation • High current capacity • High inductance • Dielectric strength 1000Vrms • Mounted on VW-1 rated header • Fixed pins for easy PCB insertion • Operating temperature -55 to +105°C

文件：55.4 Kbytes 页数：1 Pages

Bourns

伯恩斯