Load Switch

The WS4666D is a dual channel load switch that provides configurable rise time to minimize inrush current. The device contains two N-channel MOSFETs that can operate over an input voltage range of 0.6V to 5.5V and can support a maximum continuous current of 6A. The switch is controlled by an on/off • Integrated Dual Channel Load Switch\n• Input Voltage Range: 0.6V to 5.5V\n• Ultra-Low On Resistance (RON) RON = 19 mΩ at VIN = 5V (VBIAS = 5V)\n• 6A Maximum Continuous Switch Current\n• Low Control Input Threshold Enables Use of 1.2V, 1.8V, 2.5V, and 3.3V Logic\n• Configurable Rise Time\n• Quick O;

OmniVision

豪威集团

P-Channel Enhancement Mode Field Effect Transistor

文件：708.95 Kbytes 页数：6 Pages

YANGJIE

扬杰电子

EPITAXIAL PLANAR NPN TRANSISTOR (LOW NOISE AMPLIFIER)

LOW NOISE AMPLIFIER APPLICATION. FEATURE • High hFE : hFE=600∼3600. • Noise Figure : 0.5dB(Typ.) at f=100kHz.

文件：323.84 Kbytes 页数：3 Pages

KECKEC(Korea Electronics)

开益禧无锡开益禧半导体有限公司

5?? Quad, SPST, CMOS Analog Switches

General Description The MAX4664/MAX4665/MAX4666 quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to 0.5Ω max and is flat (0.5Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 5nA

文件：165.49 Kbytes 页数：12 Pages

MAXIM

美信

5?? Quad, SPST, CMOS Analog Switches

General Description The MAX4664/MAX4665/MAX4666 quad analog switches feature 5Ω max on-resistance. On-resistance is matched between switches to 0.5Ω max and is flat (0.5Ω max) over the specified signal range. Each switch can handle Rail-to-Rail® analog signals. The off-leakage current is only 5nA

文件：165.49 Kbytes 页数：12 Pages

MAXIM

美信