WDC

CERAMIC DISC

WDC28164

High-Efficiency, Single-Inductor, Buck-Boost Converter with 4.2A Switches; • 1.8V Minimum Start-Up input Voltage\r\n\r\n• 1.5V to 5.5V Input Work Range\r\n\r\n• 1.5V to 5V Output Range\r\n\r\n• 4.2A Switching Current Limit\r\n\r\n• 3.3V/2A Load Capability from a 2.6V-to-5.5V Input Supply\r\n\r\n• 2MHz Fixed or External Synchronous Switching Frequency\r\n\r\n• Selectable PSM-PWM / Force PWM Mode\r\n\r\n• Typical 25uA Quiescent Current\r\n\r\n• High Efficiency up to 95%\r\n\r\n• Load Disconnect during Shutdown\r\n\r\n• Internal Soft Start and Compensation\r\n\r\n• Power Good Indicator\r\n\r\n• Hiccup Mode for Short-Circuit Protection (SCP)\r\n\r\n• Over-Temperature Protection (OTP)\r\n\r\n• Available in a Small QFN-11(2mmx3mm) Package;

The WDC28164 is a high-efficiency, low-quiescent current, buck-boost converter that operates from an input voltage above, equal to, or below the output voltage. The device provides a compact solution for products powered by one-cell Lithium-Ion or multi-cell alkaline batteries where the output voltage is within the battery voltage range.\r\n\r\nThe WDC28164 uses current-mode control with fixed PWM frequency for optimal stability and transient response. The fixed 2MHz switching frequency and integrated lowMOSFETs minimize the solution footprint while maintaining high efficiency.\r\n\r\nTo ensure the longest possible battery life, the WDC28164 uses an optional pulse skipping mode that reduces the switching frequency under light-load conditions. For other low-noise applications where pulse skipping mode may cause interference, a high-logic input on MODE/SYNC guarantees fixed-frequency PWM operation under all load conditions.\r\n\r\nThe WDC28164 operates with an input voltage from 1.5V to 5.5V to provide an adjustable output voltage from 1.5V to 5V. With an input from 2.6V to 5.5V, the device can supply 2A of current to the load with a 3.3V output voltage.\r\n\r\nThe WDC28164 is available in a small QFN-11\r\n\r\n(2mmx3mm) package.\r\n\r\n

ETC

WDCA-1040200-I/O

包装：盒 类别：RF/IF，射频/中频和 RFID 射频放大器 描述：L3 PRODUCT

ETC

WDCA-1046100-I/O

包装：盒 类别：RF/IF，射频/中频和 RFID 射频放大器 描述：L3 PRODUCT

ETC

WDCA-1836120-I/O

包装：盒 类别：RF/IF，射频/中频和 RFID 射频放大器 描述：L3 PRODUCT

ETC