W91F812N中文资料华邦电子数据手册PDF规格书

GENERAL DESCRIPTION

The W91F810N is a series of tone/pulse switchable telephone dialers with 23-falsh memory, keytone, hold, lock, mute, volume control and handfree dialing control features. These chips are fabricated using Winbonds high-performance CMOS technology and thus offer good performance in low voltage, low-power operations.

FEATURES

• Tone/pulse switchable dialer

• Two by 32 digits redial and save memory

• Three by 32 digits one-touch direct repertory flash-memory

• Twenty by 32 digits one-touch direct or two-touch indirect repertory flash-memory

• The read-write times: 104

• Pulse-to-tone (*/T) keypad for long distance call operation

• Chain dialing

• Uses 6 ´ 6 or 7 ´ 7 keyboard

• Easy operation with redial, flash, pause, and */T keypads

• Pause, P®T (pulse-to-tone) can be stored as a digit in memory

• Dialing rate: 10 or 20 ppS by mask option

• Minimum tone output duration: 93 mS

• Minimum intertone pause: 93 mS

• Pause time: 3.6 sec.

• Flash break time (73 mS, 100 mS, 300 mS, or 600 mS) selectable by keypad; pause time is 1.0 S

• Make/break ratio (2:3 or 1:2) selectable by MODE pin

• Mute key for speech network mute

• No key will be accepted except the HOLD key when in the Hold mode

• 4-level volume control by V1 and V2 pin - default value is zero

• Key tone output for valid keypad entry recognition

• On-chip power-on reset

• Uses 3.579545 MHz crystal or ceramic resonator

• 22-pin 400 mil, 24-pin 600 mil or 28-pin 600 mil dual-in-line plastic package

• The different dialers in the W91F810N series are shown in the following table: