W29C011AS-15中文资料华邦电子数据手册PDF规格书

GENERAL DESCRIPTION

The W29C011A is a 1-megabit, 5-volt only CMOS flash memory organized as 128K ´ 8 bits. The device can be programmed and erased in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture of the W29C011A results in fast program/erase operations with extremely low current consumption (compared to other comparable 5-volt flash memory products). The device can also be programmed and erased using standard EPROM programmers.

FEATURES

· Single 5-volt program and erase operations

· Fast page-write operations

- 128 bytes per page

- Page program cycle: 10 mS (max.)

- Effective byte-program cycle time: 39 mS

- Software-protected data write

· Fast chip-erase operation: 50 mS

· Read access time: 150 nS

· Page program/erase cycles: 1,000

· Ten-year data retention

· Software and hardware data protection

· Low power consumption

- Active current: 25 mA (typ.)

- Standby current: 20 mA (typ.)

· Automatic program timing with internal VPP generation

· End of program detection

- Toggle bit

- Data polling

· Latched address and data

· TTL compatible I/O

· JEDEC standard byte-wide pinouts

· Available packages: 32-pin 600 mil DIP, 450 mil SOP and PLCC