W25X10AVSNIG集成电路（IC）的存储器规格书PDF中文资料

GENERAL DESCRIPTION

The W25X10A (1M-bit), W25X20A (2M-bit), W25X40A (4M-bit) and W25X80A (8M-bit) Serial Flash

memories provide a storage solution for systems with limited space, pins and power. The 25X series

offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code

download applications as well as storing voice, text and data. The devices operate on a single 2.7V to

3.6V power supply with current consumption as low as 5mA active and 1µA for power-down. All

devices are offered in space-saving packages.

The W25X10A/20A/40A/80A array is organized into 512/1024/2048/4096 programmable pages of

256-bytes each. Up to 256 bytes can be programmed at a time using the Page Program instruction.

Pages can be erased in groups of 16 (sector erase), groups of 256 (block erase) or the entire chip

(chip erase). The W25X10A/20A/40A/80A has 32/64/128/256 erasable sectors and 2/4/8/16 erasable

blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data

and parameter storage. (See figure 2.)

The W25X10A/20A/40A/80A supports the standard Serial Peripheral Interface (SPI), and a high

performance dual output SPI using four pins: Serial Clock, Chip Select, Serial Data I/O and Serial

Data Out. SPI clock frequencies of up to 100MHz are supported allowing equivalent clock rates of

200MHz when using the Fast Read Dual Output instruction. These transfer rates are comparable to

those of 8 and 16-bit Parallel Flash memories.

A Hold pin, Write Protect pin and programmable write protect, with top or bottom array control

features, provide further control flexibility. Additionally, the device supports JEDEC standard

manufacturer and device identification.

FEATURES

 Family of Serial Flash Memories

– W25X10A: 1M-bit / 128K-byte (131,072)

– W25X20A: 2M-bit / 256K-byte (262,144)

– W25X40A: 4M-bit / 512K-byte (524,288)

– W25X80A: 8M-bit / 1M-byte (1,048,576)

– 256-bytes per programmable page

– Uniform 4K-byte Sectors / 64K-byte Blocks

 SPI with Single or Dual Outputs

– Clock, Chip Select, Data I/O, Data Out

– Optional Hold function for SPI flexibility

 Data Transfer up to 200M-bits / second

– Clock operation to 100MHz

– Fast Read Dual Output instruction

– Auto-increment Read capability

 Software and Hardware Write Protection

– Write-Protect all or portion of memory

– Enable/Disable protection with /WP pin

– Top or bottom array protection

 Flexible Architecture with 4KB sectors

– Sector Erase (4K-bytes)

– Block Erase (64K-byte)

– Page program up to 256 bytes <2ms

– More than 100,000 erase/write cycles

– More than 20-year data retention

 Low Power Consumption, Wide

Temperature Range

– Single 2.7 to 3.6V supply

– 5mA active current, 1µA Power-down (typ)

– -40° to +85°C operating range

 Space Efficient Packaging

– 8-pin SOIC 150-mil(1)

– 8-pin SOIC 208-mil (W25X40A/80A)

– 8-pin PDIP 300-mil

– 8-pad WSON 6x5-mm