W25Q80DVZPIG集成电路（IC）的存储器规格书PDF中文资料

1. GENERAL DESCRIPTION

The W25Q80DV/DL (8M-bit) Serial Flash memory provides a storage solution for systems with limited

space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial

Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad

SPI (XIP) and storing voice, text and data. The W25Q80DV operates on a single 2.7V to 3.6V and the

W25Q80DL operateds on a single 2.3V to 3.6V power supply with current consumption as low as 1µA

for power-down.

The W25Q80DV/DL array is organized into 4,096 programmable pages of 256-bytes each. Up to 256

bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups

of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The

W25Q80DV/DL has 256 erasable sectors and 16 erasable blocks respectively. The small 4KB sectors

allow for greater flexibility in applications that require data and parameter storage. (See figure 2.)

The W25Q80DV supports the standard Serial Peripheral Interface (SPI), and a high performance

Dual/Quad output as well as Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1

(DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing

equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O

when using the Fast Read Dual/Quad I/O instructions. These transfer rates can outperform standard

Asynchronous 8 and 16-bit Parallel Flash memories. A Hold pin, Write Protect pin and programmable

write protection, with top, bottom or complement array control, provide further control flexibility.

Additionally, the device supports JEDEC standard manufacturer and device identification with a 64-bit

Unique Serial Number.

2. FEATURES

 Family of SpiFlash Memories

– W25Q80DV/DL: 8M-bit/1M-byte (1,048,576)

– 256-byte per programmable page

– Standard SPI: CLK,/CS,DI,DO,/WP,/Hold

– Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold

– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3

– Uniform 4KB Sectors, 32KB & 64KB Blocks

 Highest Performance Serial Flash

– W25Q80DV

104MHz Dual/Quad SPI clocks

208/416MHz equivalent Dual/Quad SPI

50MB/S continuous data transfer rate

– W25Q80DL

80MHz Dual/Quad SPI clocks

160/320MHz equivalent Dual/Quad SPI

40MB/S continuous data transfer rate

 Software and Hardware Write Protection

– Write-Protect all or portion of memory

– Enable/Disable protection with /WP pin

– Top or bottom array protection

 Flexible Architecture with 4KB sectors

– Uniform Sector/Block Erase (4/32/64-kbytes)

– Erase/Program Suspend & Resume

– More than 100,000 erase/write cycles

– More than 20-year data retention

 Low Power, Wide Temperature Range

– W25Q80DV: Single 2.7 to 3.6V supply

– W25Q80DL: Single 2.3 to 3.6V supply

– <1µA Power-down(typ.)

 Advanced Security & Identification Features

– Software and Hardware Write-Protect

– Top/Bottom, 4KB complement array protection

– Power Supply Lock-Down and OTP protection

– 64-Bit Unique ID for each device

– Discoverable Parameters (SFDP) Register

– 3X256-Byte Security Registers with OTP locks

– Volatile & Non-volatile Status Register Bits

 Space Efficient Packaging(1)

:

– 8-pin SOIC 150-mil/208mil, VSOP 150-mil

– 8-pad WSON 6x5-mm, USON 2x3-mm

– 8-pin PDIP 300-mil

– 8-ball WLCSP

– Contact Winbond for KGD and other options

Note 1. Some package types are special orders,

please contact Winbond for ordering

information.