VSP5610RSHR集成电路（IC）的模拟前端（AFE）规格书PDF中文资料

VSP5610RSHR属于集成电路（IC）的模拟前端（AFE）。由德州仪器制造生产的VSP5610RSHR模拟前端（AFE）模拟前端 (AFE) 是一种用于信号调节的半导体器件，由模拟放大器、运算放大器、滤波器和集成电路构成。这种可配置功能块能连接各种传感器。分辨率范围从 8 位至 42 位不等，通道数范围为 1 至 256 个。

1FEATURES

23• Four-Channel CCD/CMOS Signal: 2-Channel,

3-Channel, and 4-Channel Selectable

• Power Supply: 3.3 V Only, Typ

(Built-in LDO, 3.3 V to 1.8 V)

• Maximum Conversion Rate:

– VSP5610: 35 MSPS

– VSP5611: 50 MSPS

– VSP5612: 70 MSPS

• 16-Bit Resolution

• CDS/SH Selectable

• Maximum Input Signal Range: 2.0 V

• Analog and Digital Hybrid Gain:

– Analog Gain: 0.5 V/V to 3.5 V/V in

3/64-V/V Steps

– Digital Gain: 1 V/V to 2 V/V in

1/256-V/V Steps

• Offset Correction DAC: ±250 mV, 8-Bit

• Standard LVDS/CMOS Selectable Output:

– LVDS:

– Data Channel: 2-Channel, 3-Channel

– Clock Channel: 1-Channel

– 8-Bit/7-Bit Serializer Selectable

– CMOS: 4 Bits × 4, 8 Bits × 2

• Timing Generator:

– Fast Transfer Clock: Eight Signals

– Slow Transfer Clock: Six Signals

• Timing Adjustment Resolution: tMCLK/48

• Input Clamp/Input Reference Level

Internal/External Selectable

• Reference DAC: 0.5 V, 1.1 V, 1.5 V, 2 V

• SPI™: Three-Wire Serial

• GPIO: Four-Port

APPLICATIONS

• Copiers

• Facsimile Machines

• Scanners

DESCRIPTION

The VSP5610/11/12 are high-speed,

high-performance, 16-bit analog-to-digital-converters

(ADCs) that have four independent sampling circuit

channels for multi-output charge-coupled device (CCD) and complementary metal oxide

semiconductor (CMOS) line sensors. Pixel data from

the sensor are sampled by the sample/hold (SH) or

correlated double sampler (CDS) circuit, and are then

converted to digital data by an ADC. Data output is

selectable in low-voltage differential signaling (LVDS)

or CMOS modes.

The VSP5610/11/12 include a programmable gain to

support the pixel level inflection caused by luminance.

The integrated digital-to-analog-converter (DAC) can

be used to adjust the offset level for the analog input

signal. Furthermore, the timing generator (TG) is

integrated in these devices for the control of sensor

operation.

The VSP5610/11/12 use 1.65 V to 1.95 V for the core

voltage and 3.0 V to 3.6 V for I/Os. The core voltage

is supplied by a built-in low-dropout regulator (LDO).