VNQ5E050AK-E中文资料支持模拟电流感应的四通道高侧驱动器，用于汽车应用数据手册ST规格书

描述 Description

The VNQ5E050AK-E is a quad channel high-side driver manufactured using ST proprietary VIPower™ M0-5 technology and housed in PowerSSO-24 package. The device is designed to drive 12 V automotive grounded loads, and to provide protection and diagnostics. It also implements a 3 V and 5 V CMOS compatible interface for the use with any microcontroller.

The device integrates advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off with auto-restart and overvoltage active clamp.

A dedicated analog current sense pin is associated with every output channel providing enhanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication, overtemperature indication, short-circuit to VCCdiagnosis and on-state and off-state open-load detection. The current sensing and diagnostic feedback of the whole device can be disabled by pulling the CS_DIS pin high to share external sense resistor with similar devices.

特性 Features

• General
•Inrush current active management by power limitation
•Very low standby current
•3.0 V CMOS compatible inputs
•Optimized electromagnetic emissions
•Very low electromagnetic susceptibility
•Compliance with European directive 2002/95/EC
•Very low current sense leakage
• Diagnostic functions
•Proportional load current sense
•High current sense precision for wide currents range
•Current sense disable
•Off-state open-load detection
•Output short to VCCdetection
•Overload and short to ground (power limitation) indication
•Thermal shutdown indication
• Protections
•Undervoltage shutdown
•Overvoltage clamp
•Load current limitation
•Self limiting of fast thermal transients
•Protection against loss of ground and loss of VCC
•Overtemperature shutdown with auto restart (thermal shutdown)
•Reverse battery protected
•Electrostatic discharge protection