VN5E160ASO-E数据手册ST中文资料规格书

描述 Description

The VN5E160ASO-E is a single channel high-side driver manufactured using ST proprietary VIPower®M0-5 technology and housed in SO-16L package. The device is designed to drive 12 V automotive grounded loads, and to provide protection and diagnostics. It also implements a 3 V and 5 V CMOS-compatible interface for the use with any microcontroller.
The device integrates advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off withauto-restart and overvoltage active clamp. A dedicated analog current sense pin is associated with every output channel providing ehnanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication, overtemperature indication, short-circuit to VCCdiagnosis and ON-state and off-state open-load detection. The current sensing and diagnostic feedback of the whole device can be disabled by pulling the CS_DIS pin high to share the external sense resistor with similar devices.

特性 Features

• General
• Inrush current active management by power limitation
• Very low standby current
• 3.0 V CMOS compatible inputs
• Optimized electromagnetic emission
• Very low electromagnetic susceptibility
• Compliant with European directive 2002/95/EC
• Very low current sense leakage
• AEC-Q100 qualified
• Diagnostic functions
• Proportional load current sense
• High-precision current sense forwide-range currents
• Current sense disable
• OFF-state open-load detection
• Output short to VCCdetection
• Overload and short to ground (power limitation) indication
• Protections
• Undervoltage shutdown
• Overvoltage clamp
• Load current limitation
• Self-limiting of fast thermal transients
• Protection against loss of ground and loss of VCC
• Overtemperature shutdown with autorestart (thermal shutdown)
• Reverse battery protected
• Electrostatic discharge protection