USBUF02W6中文资料2-line EMI filter and ESD protection with R pull-up, for USB interfaces数据手册ST规格书

描述 Description

The USB specification requires upstream ports to be terminated with pull-up resistors from the D+ and D- lines to Vbus. On the implementation of USB systems, the radiated and conducted EMI should be kept within the required levels as stated by the FCC regulations. In addition to the requirements of termination and EMC compatibility, the computing devices are required to be tested for ESD susceptibility.
The USBUF provides the recommended line termination while implementing a low pass filter to limit EMI levels and providing ESD protection which exceeds IEC 61000-4-2 level 4 standard. The device is packaged in a SOT323-6L which is the smallest available lead frame package (50% smaller than the standard SOT23).

特性 Features

• Monolithic device with recommended line termination for USB upstream ports
• Integrated Rt series termination and Ct bypassing capacitors.
• Integrated ESD protection
• Small package size
• Benefits
• EMI / RFI noise suppression
• Required line termination for USB upstream ports
• ESD protection exceeding IEC 61000-4-2 level 4
• High flexibility in the design of high density boards
• Tailored to meet USB 1.1 standard
• Complies with the following standards IEC 61000-4-2, level 4
• ± 15 kV (air discharge)
• ± 8 kV (contact discharge)
• MIL STD 883E, Method 3015-7
• Class 3 C = 100 pF; R = 1500 Ω
• 3 positive strikes and 3 negative strikes (F = 1 Hz)

简介

USBUF02W6属于滤波器的EMI/RFI滤波器（LCRC网络）。由制造生产的USBUF02W6EMI/RFI 滤波器（LC，RC 网络）该系列产品将几种无源元器件集成到单个装置中，可用于产生电流的频率依赖性阻抗。尽管有其他类型，但大多数都是用于抑制不必要高频信号传输的低通型，否则可能会导致干扰或意外操作。