USB5742SLASH2GX01中文资料微芯科技数据手册PDF规格书

General Description

The Microchip USB5742 hub is low-power, OEM configurable, USB 3.2 Gen 1 hub feature controller with 2 downstream

ports and advanced features for embedded USB applications. The USB5742 is fully compliant with the Universal Serial

Bus Revision 3.2 Specification and USB 2.0 Link Power Management Addendum. The USB5742 supports 5 Gbps

SuperSpeed (SS), 480 Mbps Hi-Speed (HS), 12 Mbps Full-Speed (FS), and 1.5 Mbps Low-Speed (LS) USB downstream

devices on all enabled downstream ports.

The USB5742 supports the legacy USB speeds (HS/FS/LS) through a dedicated USB 2.0 hub feature controller that is

the culmination of five generations of Microchip hub feature controller design and experience with proven reliability,

interoperability, and device compatibility. The SuperSpeed hub feature controller operates in parallel with the USB 2.0

controller, decoupling the 5 Gbps SS data transfers from bottlenecks due to the slower USB 2.0 traffic.

The USB5742 supports downstream battery charging. The USB5742 integrated battery charger detection circuitry supports

the USB-IF Battery Charging (BC1.2) detection method and most Apple devices. The USB5742 provides the battery

charging handshake and supports the following USB-IF BC1.2 charging profiles:

• DCP: Dedicated Charging Port (Power brick with no data)

• CDP: Charging Downstream Port (1.5A with data)

• SDP: Standard Downstream Port (0.5A with data)

• Custom profiles loaded via SMBus or OTP

Additionally, the USB5742 includes many powerful and unique features such as:

PortSwap, which adds per-port programmability to USB differential-pair pin locations. PortSwap allows direct alignment

of USB signals (D+/D-) to connectors to avoid uneven trace length or crossing of the USB differential signals on the

PCB.

PHYBoost, which provides programmable levels of Hi-Speed USB signal drive strength

in the downstream port transceivers. PHYBoost attempts to restore USB signal integrity

in a compromised system environment. The graphic on the right shows an example of

Hi-Speed USB eye diagrams before and after PHYBoost signal integrity restoration. in

a compromised system environment

VariSense, which controls the USB receiver sensitivity enabling programmable levels of USB signal receive sensitivity.

This capability allows operation in a sub-optimal system environment, such as when a captive USB cable is used.

The USB5742 can be configured for operation through internal default settings. Custom OEM configurations are supported

through external SPI ROM or OTP ROM. All port control signal pins are under firmware control in order to allow

for maximum operational flexibility, and are available as GPIOs for customer specific use.

The USB5742 is available in commercial (0°C to +70°C) and industrial (-40°C to +85°C) temperature range. An internal

block diagram of the USB5742 is shown in Figure 2-1.

Highlights

• USB Hub Feature Controller IC with 2 USB 3.2

Gen 1 / USB 2.0 downstream ports

• USB-IF Battery Charger revision 1.2 support on

up & downstream ports (DCP, CDP, SDP)

• USB Link Power Management (LPM) support

• Enhanced OEM configuration options available

through either OTP or SPI ROM

• USB-IF certified (TID 330000076), supporting latest

Engineering Change Notices for compliance

with USB-IF logo testing for new USB Type-C®

industry initiative

- Header Packet Timer (TD7.9, TD7.11, TD7.26)

- Power Management Timer (TD7.18, TD7.20, TD7.23)

- Unacknowledged Connect and Remote

Wake Test Failure (TD10.25)

• Available in 56-pin (7 x 7 mm) VQFN lead-free,

RoHS compliant package

• Commercial and industrial grade temperature

support

• Configuration Straps: Predefined configuration of

system level functions

Target Applications

• Standalone USB Hubs

• Laptop Docks

• PC Motherboards

• PC Monitor Docks

• Multi-function USB 3.2 Gen 1 Peripherals