USB50815C-Ae3/TR7数据手册电路保护的TVS-二极管规格书PDF

描述 Description

This Transient Voltage Suppressor (TVS) array is packaged in an SO-8 configuration giving protection to 2 Bidirectional data or interface lines. It is designed for use in applications where very low capacitance protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 61000-4-2, electrical fast transients (EFT) per IEC 61000-4-4 and effects of secondary lightning. It is also available with either Tin-Lead plated terminations or as RoHS Compliant with annealed matte-Tin finish by adding an “e3” suffix to the part number*. Using the schematic on the second page, pins 1 & 2 are tied together for the first protected line, and pins 7 & 8 are tied together to ground. The same would occur for a second protected line where pins 3 & 4 tied together and pins 5 & 6 tied together to the ground. These may also be switched in polarity connections since the electrical features are the same in each antiparallel (opposite facing) leg when the pins are tied together in this manner for bidirectional protection. This device with an “A” suffix is opposite in polarity for each pin-to-pin leg to the USB50803C series (see schematic). This provides no functional difference for bidirectional TVS protection with the noted pins tied together as described above. These TVS arrays have a peak power rating of 500 watts for an 8/20 µsec pulse. This array is suitable for protection of sensitive circuitry consisting of TTL, CMOS DRAM’s, SRAM’s, HCMOS, HSIC microprocessors, UNIVERSAL SERIAL BUS (USB) and I/O transceivers. The USB508XXC product provides board level protection from static electricity and other induced voltage surges that can damage or upset sensitive circuitry.  ROHS, PB Free

简介

USB50815C-Ae3/TR7属于电路保护的TVS-二极管。由制造生产的USB50815C-Ae3/TR7TVS - 二极管TVS 二极管是一种半导体器件，可用于限制或阻止特定电压电平的浪涌。该系列产品使用二极管（只能单向导电的元器件）进行设计。TVS 是 Transient Voltage Suppression/Suppressor（瞬态电压抑制/抑制器）的首字母缩写。类型包括转向（轨至轨）或齐纳，具有单向通道、双向通道、电压 – 反关态、电压 – 击穿、电压 – 箝位、电流 – 峰值脉冲、功率 – 峰值脉冲和电源线路保护等特征。