USB3290中文资料USB Bridges Products数据手册Microchip规格书

描述 Description

The USB3290 provides the Physical Layer (PHY) interface to a USB 2.0 Device Controller. The IC is available in a 40 ball RoHS compliant VFBGA package. The small footprint package makes the USB3290 ideal for portable consumer electronics applications.

The USB3290 is an industrial temperature USB 2.0 physical layer transceiver (PHY) integrated circuit. Microchip's proprietary technology results in low power dissipation, which is ideal for building a bus powered USB 2.0 peripheral. The PHY uses an 8-bit bidirectional parallel interface, which complies with the USB Transceiver Macrocell Interface (UTMI) specification. It supports 480Mbps transfer rate, while remaining backward compatible with USB 1.1 legacy protocol at 12Mbps.

All required termination and 5.25V short circuit protection of the DP/DM lines are internal to the chip. The USB3290 also has an integrated 1.8V regulator so that only a 3.3V supply is required. While transmitting data, the PHY serializes data and generates SYNC and EOP fields. It also performs needed bit stuffing and NRZI encoding. Likewise, while receiving data, the PHY de-serializes incoming data, stripping SYNC and EOP fields and performs bit un-stuffing and NRZI decoding.

*The USBCheck online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.

特性 Features

Features
• Available in a 40-ball RoHS compliant (4 x 4 x 0.90mm) VFBGA package
• Interface compliant with the UTMI specification (60MHz, 8-bit bidirectional interface)
• Only one required power supply (+3.3V)
• Supports 480Mbps High Speed (HS) and 12Mbps Full Speed (FS) serial data transmission rates
• Integrated 45Ω and 1.5kΩ termination resistors reduce external component count
• Internal short circuit protection of DP and DM lines
• On-chip oscillator operates with low cost 24MHz crystal
• Latch-up performance exceeds 150mA per EIA/JESD 78, Class II
• ESD protection levels of 5kV HBM without external protection devices
• SYNC and EOP generation on transmit packets and detection on receive packets
• NRZI encoding and decoding
• Bit stuffing and unstuffing with error detection
• Supports the USB suspend state, HS detection, HS Chirp, Reset and Resume
• Support for all test modes defined in the USB 2.0 specification
• 55mA Unconfigured Current (typical) - ideal for bus powered applications.
• 83uA suspend current (typical) - ideal for battery powered applications.
• Industrial operating temperature range -40°C to +85°C
ApplicationsThe USB3290 is the ideal companion to any ASIC, SoC or FPGA solution designed with a UTMI Hi-Speed USB device (peripheral) core.The USB3290 is well suited for:
• Cell Phones
• MP3 Players
• Scanners
• External Hard Drives
• Digital Still and Video Cameras
• Portable Media Players
• Entertainment Devices
• Printers

应用 Application

The USB3290 is the ideal companion to any ASIC, SoC or FPGA solution designed with a UTMI Hi-Speed USB device (peripheral) core.The USB3290 is well suited for:·Cell Phones
·MP3 Players
·Scanners
·External Hard Drives
·Digital Still and Video Cameras
·Portable Media Players
·Entertainment Devices
·Printers

简介

USB3290属于集成电路（IC）的驱动器接收器收发器。由制造生产的USB3290驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。