US1528中文资料USB HIGH-SIDE POWER SWITCH ADVANCE INFORMATION数据手册UTC规格书

描述 Description

The UTC US1528 is an integrated high-side power switch. It is designed particularly for self-powered and bus-powered USB (Universal serial bus) applications.The UTC US1528 meets the requirements of the USB. The low on-resistance of the switch meets USB voltage drop requirements.When the output load becomes higher than the current-limit threshold, the UTC US1528 switches into constant- current mode and limits the output current at 1.4A (TYP).An open-drain flag, playing a role as the MOSFET output, is included to indicate error conditions to the local USB controller. A thermal shutdown circuit protects this device from catastrophic switch failure,which is caused by increasing power dissipation when continuous heavy loads or short circuit occurs. In addition, soft start is used to avoid the momentary voltage drop generated on the upstream port that may occur when the switch is enabled in bus-powered applications. A UVLO (under-voltage lockout) circuit is used to keep the device off unless thereis a valid input voltage present, and an enable input that is compatible with both 3.3V and 5V logic.The UTC US1528 can be used for high-side power protection switch, USB power management, USB host and self-powered hubs, hot plug-in power supplies and battery-charger circuits.

特性 Features

• Open-Drain Fault Flag
• Low on-Resistance MOSFET: Typical 110mΩ(at 5.0V)
• Operating Voltage Varying From 3.0V to 5.5V
• Output can be Forced Higher than Input when Operating in Off State.
• Slow Turn-On (Soft-Start) and Fast Turn-Off
• On-State Supply Current: 100 μA (TYP)
• Standby Supply Current: 1μA (TYP)
• Current Limit: 1.4A (TYP)
• Thermal Shutdown Protection Circuit
• UVLO (Under-Voltage Lockout): 2.4V (TYP)
• Logic Level Enable Pin, Available with Active-High/Low Version