UJA1164TK数据手册恩XP中文资料规格书

描述 Description

The UJA1164 is a mini high-speed CAN System Basis Chip (SBC) containing anISO 11898-2/5 compliant HS-CAN transceiver and an integrated 5 V/100 mA supply for amicrocontroller. It also features a watchdog and a Serial Peripheral Interface (SPI). TheUJA1164 can be operated in a very low-current Standby mode with bus wake-upcapability and supports ISO 11898-6 compliant autonomous CAN biasing.
The UJA1164 implements the standard CAN physical layer as defined in the currentISO11898 standard (-2 and -5). Pending the release of the updated version of ISO11898including CAN FD, additional timing parameters defining loop delay symmetry areincluded. This implementation enables reliable communication in the CAN FD fast phaseat data rates up to 2 Mbit/s.
A number of configuration settings are stored in non-volatile memory, allowing the SBC tobe adapted for use in a specific application. This makes it possible to configure thepower-on behavior of the UJA1164 to meet the requirements of different applications.

特性 Features

General
• ISO 11898-2 and ISO 11898-5 compliant high-speed CAN transceiver
• Loop delay symmetry timing enables reliable communication at data rates up to 2 Mbit/s in the CAN FD fast phase
• Autonomous bus biasing according to ISO 11898-6
• Fully integrated 5 V/100 mA low-drop voltage regulator for 5 V microcontroller supply (V1)
• Bus connections are truly floating when power to pin BAT is off
Designed for automotive applications
• ±8 kV ElectroStatic Discharge (ESD) protection, according to the Human Body Model (HBM) on the CAN bus pins
• ±6 kV ESD protection, according to IEC 61000-4-2 on the CAN bus pins and on pin BAT
• CAN bus pins short-circuit proof to ±58 V
• Battery and CAN bus pins protected against automotive transients according to ISO 7637-3
• Very low quiescent current in Standby mode with full wake-up capability
• Leadless HVSON14 package (3.0 mm  4.5 mm) with improved Automated Optical Inspection (AOI) capability and low thermal resistance
• Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)
Low-drop voltage regulator for 5 V microcontroller supply (V1)
• 5 V nominal output; ±2 % accuracy
• 100 mA output current capability
• Current limiting above 150 mA
• On-resistance of 5 Ω (max)
• Support for microcontroller RAM retention down to a battery voltage of 2 V
• Undervoltage reset with selectable detection thresholds: 60 %, 70 %, 80 % or 90 % of output voltage
• Excellent transient response with a 4.7 μF ceramic output capacitor
• Short-circuit to GND/overload protection on pin V1
Power Management
• Standby mode featuring very low supply current; voltage V1 remains active to maintain the supply to the microcontroller
• Remote wake-up capability via standard CAN wake-up pattern
• Wake-up source recognition
• Remote wake-up can be disabled to reduce current consumption
System control and diagnostic features
• Mode control via the Serial Peripheral Interface (SPI)
• Overtemperature warning and shutdown
• Watchdog with independent clock source
• Watchdog can be operated in Window, Timeout and Autonomous modes
• Optional cyclic wake-up in watchdog Timeout mode
• Watchdog automatically re-enabled when wake-up event captured
• Watchdog period selectable between 8 ms and 4 s
• Supports remote flash programming via the CAN bus
• 16-, 24- and 32-bit SPI for configuration, control and diagnosis
• Bidirectional reset pin with variable power-on reset length to support a variety of microcontrollers
• Configuration of selected functions via non-volatile memory