LIN-I/O slave

General description The UJA1023 is a stand-alone Local Interconnect Network (LIN) I/O slave that replaces basic components commonly used in electronic control units for input and output handling. The UJA1023 contains a LIN 2.0 controller, an integrated LIN transceiver which is LIN 2.0 / SAE J26

文件：1.37841 Mbytes 页数：49 Pages

恩XP

LIN-I/O slave

General description The UJA1023 is a stand-alone Local Interconnect Network (LIN) I/O slave that replaces basic components commonly used in electronic control units for input and output handling. The UJA1023 contains a LIN 2.0 controller, an integrated LIN transceiver which is LIN 2.0 / SAE J26

文件：1.37841 Mbytes 页数：49 Pages

恩XP

LIN-I/O slave

General description The UJA1023 is a stand-alone Local Interconnect Network (LIN) I/O slave that replaces basic components commonly used in electronic control units for input and output handling. The UJA1023 contains a LIN 2.0 controller, an integrated LIN transceiver which is LIN 2.0 / SAE J26

文件：1.37841 Mbytes 页数：49 Pages

恩XP

LIN-I/O slave

General description The UJA1023 is a stand-alone Local Interconnect Network (LIN) I/O slave that replaces basic components commonly used in electronic control units for input and output handling. The UJA1023 contains a LIN 2.0 controller, an integrated LIN transceiver which is LIN 2.0 / SAE J26

文件：1.37841 Mbytes 页数：49 Pages

恩XP

LIN-I/O slave

General description The UJA1023 is a stand-alone Local Interconnect Network (LIN) I/O slave that replaces basic components commonly used in electronic control units for input and output handling. The UJA1023 contains a LIN 2.0 controller, an integrated LIN transceiver which is LIN 2.0 / SAE J26

文件：1.37841 Mbytes 页数：49 Pages

恩XP

LIN-I/O从器件

The UJA1023 is a stand-alone Local Interconnect Network (LIN) I/O slave that replaces basic components commonly used in electronic control units for input and output handling. The UJA1023 contains a LIN 2.0 controller, an integrated LIN transceiver which is LIN 2.0 / SAE J2602 compliant and LIN 1.3 Automatic bit rate synchronization to any (master) bit rate between 1 kbit/s and 20 kbit/s\nIntegrated LIN 2.0 / SAE J2602 transceiver (including 30 kΩ termination resistor)\nEight bidirectional I/O pins\n4 x 2, 4 x 3, or 4 x 4 switch matrix to support reading and supplying a maximum number of 16 sw;

恩XP

恩智浦