UDA1380HN数据手册恩XP中文资料规格书

描述 Description

Overview
The UDA1380 is a stereo audio coder-decoder, available in TSSOP32 (UDA1380TT) and HVQFN32 (UDA1380HN) packages. All functions and features are identical for both package versions. The term ?UDA1380? in this document refers to both UDA1380TT and UDA1380HN, unless particularly specified.

The front-end of the UDA1380 is equipped with a stereo line input, which has a PGA control, and a mono microphone input with an LNA and a VGA. The digital decimation filter is equipped with an AGC which can be used in case of voice-recording.

The DAC part is equipped with a stereo line output and a headphone driver output. The headphone driver is capable of driving a 16 Ω load. The headphone driver is also capable of driving a headphone without the need for external DC decoupling capacitors, since the headphone can be connected to a pin VREF(HP) on the chip.

In addition, there is a built-in short-circuit protection for the headphone driver output which, in case of short-circuit, limits the current through the operational amplifiers and signals the event via its L3-bus or I²C-bus register.

The UDA1380 also supports an application mode in which the coder-decoder itself is not running, but an analog signal, for instance coming from an FM tuner, can be controlled in gain and applied to the output via the headphone driver and line outputs.

The UDA1380 supports the I²S-bus data format with word lengths of up to 24 bits, the MSB-justified data format with word lengths of up to 24 bits and the LSB-justified serial data format with word lengths of 16, 18, 20 or 24 bits (LSB-justified 24 bits is only supported for the output interface).

The UDA1380 has sound processing features in playback mode, de-emphasis, volume, mute, bass boost and treble which can be controlled by the L3-bus or I²C-bus interface.

特性 Features

General



2.4 to 3.6 V power supply

5 V tolerant digital inputs (at 2.7 to 3.6 V power supply)

24-bit data path for Analog-to-Digital Converter (ADC) and Digital-to-Analog
Converter (DAC)


Selectable control via L3-bus microcontroller interface or I²C-bus interface;
choice of 2 device addresses in L3-bus and I²C-bus mode


Remark:
This device does not have a static mode.



Supports sample frequencies from 8 to 55 kHz for the ADC part, and 8 to 100 kHz
for the DAC part. The ADC does not support DVD audio (96 kHz audio), only
Mini-Disc (MD), Compact-Disc (CD) and Moving Picture Experts Group Layer-3 Audio
(MP3). For playback 8 to 100 kHz is specified. DVD playback is
supported

Power management unit: Remark: By default, when the IC is powered-up, the complete
chip will be in the Power-down mode.
Separate power control for ADC, Automatic Volume Control (AVC), DAC,
Phase Locked Loop (PLL) and headphone driver

Analog blocks like ADC and Programmable Gain Amplifier (PGA) have a
block to power-down the bias circuits

When ADC and/or DAC are powered-down, the clocks to these blocks are
also stopped to save power.






ADC part and DAC part can run at different frequencies, either system clock or
Word Select PLL (WSPLL)

ADC and PGA plus integrated high-pass filter to cancel DC offset

The decimation filter is equipped with a digital Automatic Gain Control
(AGC)

Mono microphone input with Low Noise Amplifier (LNA) of 29 dB fixed gain and
Variable Gain Amplifier (VGA) from 0 to 30 dB in steps of 2 dB

Integrated digital filter plus DAC

Separate single-ended line output and one stereo headphone output, capable of
driving a 16 Ω load. The headphone driver has a built-in short-circuit
protection with status bits which can be read out from the L3-bus or I²C-bus
interface

Digital silence detection in the interpolator (playback) with read-out status via
L3-bus or I²C-bus interface

Easy application.



Multiple format data input interface



Slave BCK and WS signals

I²S-bus format

MSB-justified format compatible

LSB-justified format compatible.



Multiple format data output interface



Select option for digital output interface: either the decimator output (ADC
signal) or the output signal of the digital mixer which is in the interpolator
DSP


Selectable master or slave BCK and WS signals for digital ADC output


Remark: SYSCLK must be applied in WSPLL mode and master mode



I²S-bus format

MSB-justified format compatible

LSB-justified format compatible.



ADC front-end features



ADC plus decimator can run at either WSPLL, regenerating the clock from WSI
signal, or on SYSCLK

Stereo line input with PGA: gain range from 0 to 24 dB in steps of 3 dB

LNA with 29 dB fixed gain for mono microphone input, including VGA with gain from
0 to 30 dB in steps of 2 dB

Digital left and right independent volume control and mute from +24 to -63.5 dB
in steps of 0.5 dB.



DAC features



DAC plus interpolator can run at either WSPLL (regenerating the clock from WSI)
or at SYSCLK

Separate digital logarithmic volume control for left and right channels via
L3-bus or I²C-bus from 0 to -78 dB in steps of 0.25 dB

Digital tone control, bass boost and treble via L3-bus or I²C-bus
interface

Digital de-emphasis for sample frequencies of: 32, 44.1, 48 and 96 kHz via L3-bus
or I²C-bus interface

Cosine roll-off soft mute function

Output signal polarity control via L3-bus or I²C-bus interface

Digital mixer for mixing ADC output signal and digital serial input signal, if
they run at the same sampling frequency.

应用 Application

This audio coder-decoder is suitable for home and portable applications like MD, CD and MP3 players.