UCC27289集成电路（IC）的全半桥驱动器规格书PDF中文资料

UCC27289属于集成电路（IC）的全半桥驱动器。由德州仪器制造生产的UCC27289全半桥驱动器器件属于电桥驱动器电源管理集成电路 (PMIC) 系列，包含两个或多个功率晶体管，以及在外部器件控制下将其用作开关所需的电路。这些晶体管通常在内部配置为成对串联连接（称为半桥），因而任意指定晶体管对之间的结点都可以连接至两个电源轨中的任一个。这类器件常用于将控制器件（如微控制器）提供的低电平信号转换为操作执行器（如步进电机或无刷电机）所需的较大功率信号。

1 Features

• Drives two N-channel MOSFETs in high-side lowside

configuration

• Enable/disable functionality in DRC package

• Low current (7-μA) consumption when disabled

• 16-ns typical propagation delay

• 12-ns rise, 10-ns fall time with 1800-pF load

(typical)

• 1-ns typical delay matching

• Integrated 100V bootstrap diode

• 8-V typical undervoltage lockout

• Absolute maximum negative voltage handling on

inputs (–5 V)

• Absolute maximum negative voltage handling on

HS (–14 V)

• ±3-A peak output current

• Absolute maximum boot voltage 120 V

• Inputs are independent of each other and VDD

• Under voltage lockout for both channels

• Specified from –40°C to 140°C junction

temperature

2 Applications

• Merchant network & server PSU

• Merchant telecom rectifiers

• DC input BLDC motor drive

• Solar micro inverters

• Test & measurement equipment

3 Description

The UCC27289 is a robust N-channel MOSFET driver

with a maximum switch node (HS) voltage rating

of 100 V. It allows for two N-channel MOSFETs

to be controlled in half-bridge or synchronous buck

configuration based topologies. Its 3-A peak source

and sink current along with low pull-up and pulldown

resistance allows the UCC27289 to drive large

power MOSFETs with minimum switching losses

during the transition of the MOSFET Miller plateau.

Since the inputs are independent of the supply

voltage, UCC27289 can be used in conjunction with

both analog and digital controllers. Two inputs are

completely independent of each other and thus two

outputs can be overlapped by overlapping inputs,

if needed. The enable and disable functionality

provides additional system flexibility by reducing

power consumption by the driver and responds to

fault events within the system.

The input pins as well as the HS pin are able to

tolerate significant negative voltage, which improves

system robustness. Small propagation delay and

delay matching specifications minimize the dead-time

requirement which improves system efficiency.

Under voltage lockout (UVLO) is provided for both

the high-side and low-side driver stages forcing

the outputs low if the VDD voltage is below the

specified threshold. An integrated bootstrap diode

eliminates the need for an external discrete diode

in many applications, which saves board space and

reduces system cost. UCC27289 is offered in multiple

packages to accommodate system requirements such

as robustness in harsh environments and density in

compact applications.