丝印：U284；Package：VSON；UCC27284 3-A 120-V Half-Bridge Driver with Negative Voltage Handling and Low Switching Losses

1 Features • Drives two N-channel MOSFETs in high-side lowside configuration • 5-V typical undervoltage lockout • Enable/disable functionality in DRC package • 16-ns typical propagation delay • 12-ns rise, 10-ns fall time with 1.8-nF load • 1-ns typical delay matching • 5-V negative voltag

文件：2.24818 Mbytes 页数：38 Pages

TI

德州仪器

UCC27284 3-A 120-V Half-Bridge Driver with Negative Voltage Handling and Low Switching Losses

1 Features • Drives two N-channel MOSFETs in high-side lowside configuration • 5-V typical undervoltage lockout • Enable/disable functionality in DRC package • 16-ns typical propagation delay • 12-ns rise, 10-ns fall time with 1.8-nF load • 1-ns typical delay matching • 5-V negative voltag

文件：2.05262 Mbytes 页数：37 Pages

TI

德州仪器

UCC27284 3-A 120-V Half-Bridge Driver with Negative Voltage Handling and Low Switching Losses

1 Features • Drives two N-channel MOSFETs in high-side lowside configuration • 5-V typical undervoltage lockout • Enable/disable functionality in DRC package • 16-ns typical propagation delay • 12-ns rise, 10-ns fall time with 1.8-nF load • 1-ns typical delay matching • 5-V negative voltag

文件：2.24818 Mbytes 页数：38 Pages

TI

德州仪器

UCC27284 120-V Half-Bridge Driver with Negative Voltage Handling and Low Switching Losses

文件：1.80274 Mbytes 页数：30 Pages

TI

德州仪器

UCC27284 120-V Half-Bridge Driver with Negative Voltage Handling and Low Switching Losses

文件：1.80274 Mbytes 页数：30 Pages

TI

德州仪器

UCC27284-Q1 Automotive 120-V Half-Bridge Driver with Negative Voltage Handling and Low Switching Losses

文件：1.18271 Mbytes 页数：32 Pages

TI

德州仪器

UCC27284-Q1 Automotive 120-V Half-Bridge Driver with Negative Voltage Handling and Low Switching Losses

文件：1.18271 Mbytes 页数：32 Pages

TI

德州仪器

UCC27284-Q1 Automotive 120-V Half-Bridge Driver with Negative Voltage Handling and Low Switching Losses

文件：1.18271 Mbytes 页数：32 Pages

TI

德州仪器

具有 5V UVLO 和使能功能的汽车类 3A、120V 半桥栅极驱动器

The UCC27284-Q1 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3.5-A peak sink current and 2.5-A peak source current along with lo • AEC-Q100 qualified with following results \n• Device HBM ESD classification level 1B\n• Drives two N-channel MOSFETs in high-side low-side configuration\n• 16-ns typical propagation delay\n• 1-ns typical delay matching\n• 14-V negative voltage handling on HS\n• Absolute maximum boot voltage 120 V\;

TI

德州仪器

Package：8-SOIC（0.154"，3.90mm 宽）；包装：管件 类别：集成电路（IC） 栅极驱动器 描述：IC ISOLATION

TI

德州仪器