UC2525A中文资料工作温度范围为 -25°C 至 85°C 的 35V、双路 0.4A 400KHz PWM 控制器数据手册TI规格书

描述 Description

The UC1525A/1527A series of pulse width modulator integrated circuits are designed to offer improved performance and lowered external parts count when used in designing all types of switching power supplies. The on-chip 5.1-V reference is trimmed to 1% and the input common-mode range of the error amplifier includes the reference voltage, eliminating external resistors. A sync input to the oscillator allows multiple units to be slaved or a single unit to be synchronized to an external system clock. A single resistor between CT and the discharge terminals provides a wide range of dead-time adjustment. These devices also feature built-in soft-start circuitry with only an external timing capacitor required. A shutdown terminal controls both the soft-start circuitry and the output stages, providing instantaneous turn off through the PWM latch with pulsed shutdown, as well as soft-start recycle with longer shutdown commands.

特性 Features

• 8-V to 35-V Operation
• 100-Hz to 500-kHz Oscillator Range
• Adjustable Dead-Time Control
• Pulse-by-Pulse Shutdown
• Latching PWM to Prevent Multiple Pulses
• Dual Source and Sink Output Drivers

简介

UC2525A属于集成电路（IC）的PMIC-稳压器-DCDC开关式控制器。由TI制造生产的UC2525ADC-DC 开关控制器PMIC（电源管理集成电路）DC 到 DC 开关式控制器是用于高效率电路的稳压 IC，其配置为生成高于（突升或步升）或低于（突降或步降）输入电源的输出电源电压。其他拓扑结构可能包括：降压-升压、反激、正激、Cuk、SEPIC、全桥、半桥和推挽式。这些器件不同于需要最小电压并“烧尽”多余电压的线性稳压器。