TXV0108-Q1 Automotive 8-Bit Direction Controlled Low-Skew, Low-Jitter Voltage Translator or Buffer

1 Features • AEC-Q100 qualified for automotive applications • Integrated damping output resistor • Pin compatible with SN74AVC8T245 • Direction controlled voltage level shifter and buffer for general and skew sensitive applications • Meets RGMII 2.0 standard timing specifications: –

文件：1.37176 Mbytes 页数：25 Pages

TI

德州仪器

TXV0108 8-Bit Direction Controlled Low-Skew, Low-Jitter Voltage Translator or Buffer

1 Features • Supports up to 500-Mbps for 1.65 V to 3.6 V • Meets RGMII 2.0 timing specifications: –

文件：2.15094 Mbytes 页数：30 Pages

TI

德州仪器

TXV0108-Q1 Automotive 8-Bit Direction Controlled Low-Skew, Low-Jitter Voltage Translator or Buffer

1 Features • Supports up to 500-Mbps for 1.65 V to 3.6 V • AEC-Q100 qualified for automotive applications • Meets RGMII 2.0 timing specifications: –

文件：2.25954 Mbytes 页数：31 Pages

TI

德州仪器

汽车级双电源固定方向八通道电压转换器

TXV0108-Q1 是一款 8 位、双电源、方向控制型、低偏斜电压转换器件。该器件可用于在偏斜敏感接口上发送信号（例如 MAC 和 PHY 之间的 RGMII 信号）时进行缓冲或转接驱动、电压转换和上电隔离。Ax 引脚和控制引脚（DIR、 OE）以 V CCA 逻辑电平为基准，Bx 引脚以 V CCB 逻辑电平为基准。该器件具有改进的通道间偏斜、占空比失真和对称上升或下降时序，适用于需要严格时序条件的应用。\n\n该器件完全符合使用 I off 的部分断电应用的规范要求。I off 电路禁用输出，从而可防止其断电时破坏性电流从该器件回流。\n\nV CC 隔离特性旨在确保如果任一 V CC • AEC-Q100 qualified for automotive applications\n• Pin compatible with SN74AVC8T245\n• Meets RGMII 2.0 standard timing specifications: \n• Fully configurable symmetric dual-rail design allows each port to operate from 1.65 V to 3.6 V\n• 250-Mbps maximum to meet RGMII timing specs\n• High drive stre;

TI

德州仪器

TXV0108-Q1 Automotive 8-Bit Direction Controlled Low-Skew, Low-Jitter Voltage Translator or Buffer

1 Features • Supports up to 500-Mbps for 1.65 V to 3.6 V • AEC-Q100 qualified for automotive applications • Meets RGMII 2.0 timing specifications: –

文件：2.25954 Mbytes 页数：31 Pages

TI

德州仪器