首页>TXS0102DCTRE4>规格书详情
TXS0102DCTRE4中文资料PDF规格书
TXS0102DCTRE4规格书详情
1 Features
1• No Direction-Control Signal Needed
• Maximum Data Rates
– 24 Mbps (Push Pull)
– 2 Mbps (Open Drain)
• Available in the Texas Instruments NanoStar™
Package
• 1.65 V to 3.6 V on A Port and 2.3 V to 5.5 V on B
Port (VCCA ≤ VCCB)
• VCC Isolation Feature: If Either VCC Input Is at
GND, Both Ports Are in the High-Impedance State
• No Power-Supply Sequencing Required: Either
VCCA or VCCB Can Be Ramped First
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Protection Exceeds JESD 22
– A Port:
– 2500-V Human-Body Model (A114-B)
– 250-V Machine Model (A115-A)
– 1500-V Charged-Device Model (C101)
– B Port:
– 8-kV Human-Body Model (A114-B)
– 250-V Machine Model (A115-A)
– 1500-V Charged-Device Model (C101)
2 Applications
• I2C / SMBus
• UART
• GPIO
3 Description
This two-bit non-inverting translator is a bidirectional
voltage-level translator and can be used to establish
digital switching compatibility between mixed-voltage
systems. It uses two separate configurable powersupply
rails, with the A ports supporting operating
voltages from 1.65 V to 3.6 V while it tracks the VCCA
supply, and the B ports supporting operating voltages
from 2.3 V to 5.5 V while it tracks the VCCB supply.
This allows the support of both lower and higher logic
signal levels while providing bidirectional translation
capabilities between any of the 1.8-V, 2.5-V, 3.3-V,
and 5-V voltage nodes.
When the output-enable (OE) input is low, all I/Os are
placed in the high-impedance state, which
significantly reduces the power-supply quiescent
current consumption.
To ensure the high-impedance state during power up
or power down, OE should be tied to GND through a
pulldown resistor; the minimum value of the resistor is
determined by the current-sourcing capability of the
driver.
产品属性
- 型号:
TXS0102DCTRE4
- 功能描述:
转换 - 电压电平 2B Bidir Vltg-Level Translator
- RoHS:
否
- 制造商:
Micrel
- 类型:
CML/LVDS/LVPECL to LVCMOS/LVTTL
- 传播延迟时间:
1.9 ns
- 电源电流:
14 mA
- 电源电压-最大:
3.6 V
- 电源电压-最小:
3 V
- 最大工作温度:
+ 85 C
- 安装风格:
SMD/SMT
- 封装/箱体:
MLF-8
供应商 | 型号 | 品牌 | 批号 | 封装 | 库存 | 备注 | 价格 |
---|---|---|---|---|---|---|---|
TI/德州仪器 |
23+ |
SSOP8 |
90000 |
只做原厂渠道价格优势可提供技术支持 |
询价 | ||
TI/德州仪器 |
2126+ |
SM8 |
985 |
只做原装正品现货!或订货假一赔十! |
询价 | ||
TI |
22+23+ |
SM8 |
18371 |
绝对原装正品全新进口深圳现货 |
询价 | ||
TI/德州仪器 |
21+ |
SSOP8 |
5000 |
原装现货/假一赔十/支持第三方检验 |
询价 | ||
TI |
17+ |
原厂原封 |
6523 |
进口原装公司百分百现货可出样品 |
询价 | ||
TI |
2024+ |
SSOP-8 |
16000 |
原装优势绝对有货 |
询价 | ||
TI-德州仪器 |
24+25+/26+27+ |
SMD-8.贴片 |
36218 |
一一有问必回一特殊渠道一有长期订货一备货HK仓库 |
询价 | ||
TI |
1845+ |
SOP8 |
5790 |
只做原装!量大可以订货!特价支持实单! |
询价 | ||
TI/德州仪器 |
2122+ |
DSBGA8 |
50000 |
全新原装正品,优势渠道,假一赔十 |
询价 | ||
TI |
17+ |
NA |
6200 |
100%原装正品现货 |
询价 |