TXS0102 2-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features • No direction-control signal needed • Maximum data rates: – 24Mbps (push pull) – 2Mbps (open drain) • Available in the Texas Instruments NanoStar™ integrated circuit package • 1.65V to 3.6V on A port and 2.3V to 5.5V on B port (VCCA ≤ VCCB) • VCC isolation feature: if either V

文件：1.73951 Mbytes 页数：45 Pages

TI

德州仪器

2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN APPLICATIONS

文件：261.64 Kbytes 页数：13 Pages

TI

德州仪器

2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS

文件：448.72 Kbytes 页数：19 Pages

TI

德州仪器

2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS

文件：497.01 Kbytes 页数：18 Pages

TI

德州仪器

2-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS

文件：718.32 Kbytes 页数：23 Pages

TI

德州仪器

适用于漏极开路和推挽应用的 2 位双向电压电平转换器

此两位同相转换器是一个双向电压电平转换器，可用来在混合电压系统之间建立数字开关兼容性。它使用两个独立的可配置电源轨，其中 A 端口支持 1.65V 至 3.6V 工作电压范围，同时可跟踪 VCCA 电源，而 B 端口支持 2.3V 至 5.5V 工作电压范围，同时可跟踪 VCCB 电源。因此，该器件能够支持更低及更高的逻辑信号电平，同时能够在 1.8V、2.5V、3.3V 和 5V 电压节点之间任意进行双向转换。\n\n当输出使能端 (OE) 输入为低电平时，所有输入/输出均处于高阻抗状态，从而显著减少了电源静态电流消耗。\n\n为确保在上电或掉电期间均处于高阻抗状态，应将 OE 通过下拉电阻 • 无需方向控制信号\n• 24Mbps（推挽）\n• 采用德州仪器的 NanoStar™封装\n• VCC 隔离特性：如果任何一个 VCC 输入接地 (GND)，则两个端口均处于高阻抗状态\n• Ioff 支持局部关断模式运行\n• 静电放电 (ESD) 保护性能超过 JESD 22 规范的要求 \n• 2500V 人体放电模型 (A114-B)\n• 1500V 充电器件模型 (C101)\n• B 端口： \n• 250V 机器放电模式 (A115-A)\n• 1500V 充电器件模型 (C101);

TI

德州仪器

TXS0102 2-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features 1• No Direction-Control Signal Needed • Maximum Data Rates – 24 Mbps (Push Pull) – 2 Mbps (Open Drain) • Available in the Texas Instruments NanoStar™ Package • 1.65 V to 3.6 V on A Port and 2.3 V to 5.5 V on B Port (VCCA ≤ VCCB) • VCC Isolation Feature: If Either VCC Input Is a

文件：1.10474 Mbytes 页数：40 Pages

TI

德州仪器

TXS0102 2-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features 1• No Direction-Control Signal Needed • Maximum Data Rates – 24 Mbps (Push Pull) – 2 Mbps (Open Drain) • Available in the Texas Instruments NanoStar™ Package • 1.65 V to 3.6 V on A Port and 2.3 V to 5.5 V on B Port (VCCA ≤ VCCB) • VCC Isolation Feature: If Either VCC Input Is a

文件：1.10474 Mbytes 页数：40 Pages

TI

德州仪器

丝印：NFE；Package：DCT；TXS0102 2-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features 1• No Direction-Control Signal Needed • Maximum Data Rates – 24 Mbps (Push Pull) – 2 Mbps (Open Drain) • Available in the Texas Instruments NanoStar™ Package • 1.65 V to 3.6 V on A Port and 2.3 V to 5.5 V on B Port (VCCA ≤ VCCB) • VCC Isolation Feature: If Either VCC Input Is a

文件：1.10474 Mbytes 页数：40 Pages

TI

德州仪器

TXS0102 2-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features • No direction-control signal needed • Maximum data rates: – 24Mbps (push pull) – 2Mbps (open drain) • Available in the Texas Instruments NanoStar™ integrated circuit package • 1.65V to 3.6V on A port and 2.3V to 5.5V on B port (VCCA ≤ VCCB) • VCC isolation feature: if either V

文件：1.73951 Mbytes 页数：45 Pages

TI

德州仪器