TXS0101中文资料适用于漏极开路和推挽应用的 1 位双向电压电平转换器数据手册TI规格书

描述 Description

This one-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.65 V to 3.6 V. The B port is designed to track VCCB. VCCA must be less than or equal to VCCB. VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low voltage bidirectional translation between any of the 1.8 V, 2.5 V, 3.3 V, and 5 V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

特性 Features

• Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
• A Port
• 200 V Machine Model (A115-A)
• B Port
• 200 V Machine Model (A115-A)
• No Direction-Control Signal Needed
• 24 Mbps (Push Pull)
• Available in the Texas Instruments NanoFree™ Package
• VCC Isolation Feature – If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State
• Ioff Supports Partial-Power-Down Mode Operation