TXS0101-Q1 Automotive 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto-Direction-Sensing for Open-Drain and Push-Pull Applications

1 Features • Qualified for automotive applications • AEC-Q100 qualified with the following results – Device temperature grade 1: -40°C to +125°C ambient operating temperature range • Latch-up performance exceeds 100mA per JESD 78, class II • ESD protection exceeds JESD 22: – A Port: • 250

文件：1.20175 Mbytes 页数：28 Pages

TI

德州仪器

TXS0101 1-Bit Bidirectional Level-Shifting, Voltage-Level Translator With Auto- Direction-Sensing for Open-Drain and Push-Pull Applications

1 Features • Latch-up performance exceeds 100mA per JESD 78, class II • ESD protection exceeds JESD 22: – A Port: • 2500V Human-Body Model (A114-B) • 200V Machine Model (A115-A) • 1500V Charged-Device Model (C101) – B port: • 8kV Human-Body Model (A114-B) • 200V Machine Model (A115-A) •

文件：2.09871 Mbytes 页数：34 Pages

TI

德州仪器

适用于开漏和推挽应用的汽车类 1 位双向电压电平转换器

这款 1 位同相转换器使用两个独立的可配置电源轨。A 端口旨在跟踪 VCCA。VCCA 电源电压为 1.2V 至 3.6V。只要 VCCA 小于 3.6V，VCCA 可以大于或等于 VCCB。B 端口旨在跟踪 VCCB。VCCB 电源电压为 1.65V 至 5.5V。因此可在 1.8V、2.5V、3.3V 和 5V 电压节点之间进行低电压双向转换。\n\n当输出使能端 (OE) 输入为低电平时，所有输出都被置于高阻态。\n\n要在上电或断电期间将器件置于高阻抗状态，应通过一个上拉电阻器将 OE 连接至 GND；该电阻器的最小值由驱动器的电流灌入能力决定。 符合汽车应用要求\n \n具有符合 AEC-Q100 标准的下列特性 \n \n器件温度等级 1：–40°C 至 +125°C 环境工作温度范围\n \n\n \n闩锁性能超过 100mA，符合 JESD 78 II 类规范的要求\n \nESD 保护性能超过 JESD 22 规范要求： \n \nA 端口： \n \n2500V 人体放电模型 (A114-B)\n \n200V 机器放电模型 (A115-A)\n \n1500V 充电器件模型 (C101)\n \n\n \nB 端口： \n \n8kV 人体放电模型 (A114-B)\n \n200V 机器放电模型 (A115-A)\n \;

TI

德州仪器

TXU0101 Single-Bit Fixed Direction Voltage-Level Translator with Schmitt-Trigger Inputs and 3-State Outputs

1 Features • Fully configurable dual-rail design allows each port to operate from 1.1 V to 5.5 V • Up to 200 Mbps support for 3.3 V to 5.0 V • Schmitt-trigger inputs allows for slow and noisy inputs • Inputs with integrated static pull-down resistors prevent channels from floating • High d

文件：2.26596 Mbytes 页数：40 Pages

TI

德州仪器

TXU0101-Q1 Automotive Single-Bit Fixed Direction Voltage-Level Translator With Schmitt-Trigger Inputs and 3-State Outputs

1 Features • Fully configurable dual-rail design allows each port to operate from 1.1 V to 5.5 V • Up to 200 Mbps support for 3.3 V to 5.0 V • Schmitt-trigger inputs allows for slow and noisy inputs • Inputs with integrated static pull-down resistors prevent channels from floating • High d

文件：2.19848 Mbytes 页数：37 Pages

TI

德州仪器

TXU0101-Q1 Automotive Single-Bit Fixed Direction Voltage-Level Translator With Schmitt-Trigger Inputs and 3-State Outputs

1 Features • Fully configurable dual-rail design allows each port to operate from 1.1 V to 5.5 V • Up to 200 Mbps support for 3.3 V to 5.0 V • Schmitt-trigger inputs allows for slow and noisy inputs • Inputs with integrated static pull-down resistors prevent channels from floating • High d

文件：2.08811 Mbytes 页数：35 Pages

TI

德州仪器