Conduction Cooled, 2 Channel 10GBASE-T Ethernet

The TXMC397 is a Conduction Cooled Switched Mezzanine Card (CCXMC) compatible module providing a two channel 100Base-TX / 1000Base-T / 2.5GBase-T / 5GBase-T / 10GBase-T Ethernet interface. The XMC-Connector P15 provides access to the Intel X710-AT2 dual port 10GbE controller via an x4 PCIe li

文件：476.39 Kbytes 页数：2 Pages

TEWS

Conduction Cooled, 2 Channel 10GBASE-T Ethernet

The TXMC397 is a Conduction Cooled Switched Mezzanine Card (CCXMC) compatible module providing a two channel 100Base-TX / 1000Base-T / 2.5GBase-T / 5GBase-T / 10GBase-T Ethernet interface.\n\nThe XMC-Connector P15 provides access to the Intel X710-AT2 dual port 10GbE controller via an x4 PCIe link. • Conduction Cooled single-width XMC module\n• 2 channel 10GBASE-T / NBASE-T / 1000BASE-T / 100BASE-TX\n• IPMI resource: FRU hardware definition information stored in on-board EEPROM\n• PXE and iSCSI boot (64 Mbit serial flash)\n• IEEE 1588/802.1AS Precision Time Protocol (PTP)\n• Rear I/O via P16 –;

TEWS

Conduction Cooled, 2 Channel 10GBASE-T Ethernet

The TXMC397 is a Conduction Cooled Switched Mezzanine Card (CCXMC) compatible module providing a two channel 100Base-TX / 1000Base-T / 2.5GBase-T / 5GBase-T / 10GBase-T Ethernet interface. The XMC-Connector P15 provides access to the Intel X710-AT2 dual port 10GbE controller via an x4 PCIe li

文件：476.39 Kbytes 页数：2 Pages

TEWS

Conduction Cooled, 2 Channel 10GBASE-T Ethernet

The TXMC397 is a Conduction Cooled Switched Mezzanine Card (CCXMC) compatible module providing a two channel 100Base-TX / 1000Base-T / 2.5GBase-T / 5GBase-T / 10GBase-T Ethernet interface. The XMC-Connector P15 provides access to the Intel X710-AT2 dual port 10GbE controller via an x4 PCIe li

文件：476.39 Kbytes 页数：2 Pages

TEWS