TXMC395中文资料Conduction Cooled, 4 Channel 1000BASE-T Ethernet数据手册TEWS规格书

描述 Description

The TXMC395 is a Conduction Cooled Switched Mezzanine Card (CCXMC) compatible module providing a four channel Ethernet 10Base-T / 100Base-TX / 1000Base-T interface.

A PCIe Switch provides access to the Intel I210IT Gigabit Ethernet controllers. Each Ethernet interface supports 10, 100 and 1000 Mbit/s transmission rates and is equipped with a 16 Mbit Serial Flash to support PXE and iSCSI boot.

The four Ethernet interfaces of the TXMC395 are capable of performing an auto negotiation algorithm which allows both link-partners to determine the best link-parameters. The TXMC395 supports IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping (with software extensions).

The TXMC395-10R routes four Ethernet ports to the Back I/O P16 connector. Two ports are mapped in the X12d range and two ports are mapped in the X8d range specified in VITA46.9 standard.

All ports are galvanically isolated from the Ethernet controllers and LEDs on the board indicate the different network activities.

The module meets the requirements to operate in extended temperature range from -40°C to +85°C.

Software Support:

Software support for Intel I210IT at www.intel.comFor operating systems not supported by Intel®, please contact TEWS.

特性 Features

• Conduction Cooled single-width XMC module
• 4 channel 1000BASE-T / 100BASE-TX / 10BASE-T
• IPMI resource: FRU hardware definition information stored in on-board EEPROM
• PXE and iSCSI boot (16 Mbit serial flash)
• IEEE 1588/802.1AS Precision Time Protocol (PTP) and IEEE 802.1Qav Audio/Video Bridging (AVB) traffic shaping
• Rear I/O via P16 – 2 channels mapped in X12d range and 2 channels mapped in X8d range (VITA46.9)