TWL6030中文资料具有开关模式充电器的全集成电源管理 IC (PMIC)数据手册TI规格书

描述 Description

The TWL6030 device is an integrated power-management integrated circuit (IC) for applications powered by a rechargeable battery. The device provides seven configurable step-down converters with up to 2.0-A capability for memory, processor core, I/O, auxiliary, preregulation for LDOs, and so forth. The device also contains 11 LDO regulators that can be supplied from a battery or a preregulated supply. The power-up and power-down controller is configurable and can support any power-up and power-down sequences (programmed in OTP memory). The real-time clock (RTC) provides a 32-kHz output buffer, second, minute, hour, day, month, year information, and alarm wake up. The TWL6030 device supports 32-kHz clock generation based on a crystal oscillator. The device integrates a switched-mode charger allowing faster battery charge, higher efficiency, and less power dissipation.
The TWL6030 device generates power supplies for OMAP™ 4 processors and operates together with the TWL6040 device, which includes all audio and related detection features. For audio IC parameters, see the TWL6040 data sheet. The TWL6030 device is available in an nFBGA package, 7.0 mm x 7.0 mm, with a 0.4-mm ball pitch.

特性 Features

·Seven Highly Efficient 6-MHz Buck Converters· Two 0.6 to 2.1 V at 1.5 A (up to 2.0 A with some Limitations)
· Five 0.6 to 2.1 V at 0.8 A (up to 1.0 A with some Limitations)

·11 General-PurposeLDOs·Six 1.0 to 3.3 V at 0.2 A with Battery or Preregulated Supply (One can be used as a Vibrator Driver)
·One 1.0 to 3.3 V at 50 mA with Battery or Preregulated Supply
·One Low Noise 1.0 to 3.3 V at 50 mA with Battery or Preregulated Supply
·3.3 V at 35 mA USB LDO
·One LDO for TWL6030 Internal Use
· One LDO for Internal and External Use
·USB OTG Module
·Backup BatteryCharger
·10-Bit ADC with 17 Input Channels
·13-Bit CoulombCounter with Four Programmable Integration Periods
·Low-PowerConsumption·5 µA in Backup Mode
·20 µA in Wait-on Mode
·110 µA in Deep Sleep, with Two DC-DC Converters Active
·RTCwith Alarm Wake-up Mechanism
· SIM and MMC Card Detections
·Two Digital PWM Outputs
· ThermalMonitoring· High-Temperature Warning
·Thermal Shutdown
·Control·Configurable Power-up and Power-down Sequences (OTP Memory)
· Three Output Signals that can be Included in the Start-up Sequence
·Two I2C Interfaces
·All Resources Configurable by I2C
· ClockManagement
32-kHz Output ·Battery Charger 1.5 A·Charger for Single-Cell Li-Ion and Li-Polymer Battery Packs
·Switched-Mode Charger with Integrated Power FET for up to 1.5-A Current
·High-Accuracy Voltage and Current Regulation
·Safety Timer and Reset Control
·Thermal Regulation Protection
· Input/Output Overvoltage Protection
·Charging Indicator LED Driver
·Boost Mode Operation for USB OTG
·Compliant with:·USB 2.0
·OTG and EH 2.0
·YD/T 1591-2006
·USB Battery Charging 1.2
·Japanese Battery Charging Requirements (JEITA)
·Package:7 mm x 7 mm 187-Pin nFBGA