TVS0701 7-V Bidirectional Flat-Clamp Surge Protection Device

1 Features 1• Protection Against 1-kV, 42-Ω IEC 61000-4-5 Surge Test for Industrial Signal Lines • Bidirectional Polarity Enables Protection Against Bipolar Signaling or Miswiring Conditions • Clamping Voltage of 11 V at 30-A, 8/20-μs Surge Current • Standoff Voltage: ±7 V • Small 3-mm × 3

文件：712.25 Kbytes 页数：21 Pages

TI

德州仪器

TVS2201 22-V Bidirectional Flat-Clamp Surge Protection Device

1 Features 1• Protection Against 1-kV, 42-Ω IEC 61000-4-5 Surge Test for Industrial Signal Lines • Bidirectional Polarity Enables Protection Against Bipolar Signaling or Miswiring Conditions • Clamping Voltage of 29.6 V at 30 A of 8/20-μs Surge Current • Standoff Voltage: ±22 V • Small 3 m

文件：726.41 Kbytes 页数：21 Pages

TI

德州仪器

TVS2701 27-V Bidirectional Flat-Clamp Surge Protection Device

1 Features 1• Protection Against 1-kV, 42-Ω IEC 61000-4-5 Surge Test for Industrial Signal Lines • Bidirectional Polarity Enables Protection Against Bipolar Signaling or Miswiring Conditions • Clamping Voltage of 34 V at 27-A, 8/20-μs Surge Current • Standoff Voltage: ±27 V • Small 3 mm ×

文件：752.73 Kbytes 页数：21 Pages

TI

德州仪器

TVS3300 33-V Flat-Clamp Surge Protection Device

1 Features 1• Protection Against 1 kV, 42 Ω IEC 61000-4-5 Surge Test for Industrial Signal Lines • Max Clamping Voltage of 40 V at 35 A of 8/20 μs Surge Current • Standoff Voltage: 33 V • Tiny 1.1 mm2 WCSP and 4 mm2 SON Footprints • Survives Over 4,000 Repetitive Strikes of 30 A 8/20 μs Su

文件：1.59399 Mbytes 页数：27 Pages

TI

德州仪器

TVS0500 5-V Flat-Clamp Surge Protection Device

1 Features 1• Protection Against 2 kV, 42 Ω IEC 61000-4-5 Surge Test for Industrial Signal Lines • Max Clamping Voltage of 9.2 V at 43 A of 8/20 μs Surge Current • Standoff Voltage: 5 V • Tiny 4 mm2 Footprint • Survives over 5,000 Repetitive Strikes of 35 A 8/20 μs Surge Current at 125°C

文件：1.29232 Mbytes 页数：22 Pages

TI

德州仪器

TVS1400 14-V Flat-Clamp Surge Protection Device

1 Features 1• Protection Against ±2 kV, 42 Ω IEC 61000-4-5 Surge Test for Industrial Signal Lines • Max Clamping Voltage of 19.3 V at 43 A of 8/20 μs Surge Current • Standoff Voltage: 14 V • Tiny 4 mm2 Footprint • Survives Over 5,000 Repetitive Strikes of 35 A 8/20 μs Surge Current at 125°

文件：1.20276 Mbytes 页数：22 Pages

TI

德州仪器

TVS1800 18-V Flat-Clamp Surge Protection Device

1 Features 1• Protection Against ±1 kV, 42 Ω IEC 61000-4-5 Surge Test for Industrial Signal Lines • Max Clamping Voltage of 24.7 V at 40 A of 8/20 μs Surge Current • Standoff Voltage: 18 V • Tiny 4 mm2 Footprint • Survives Over 5,000 Repetitive Strikes of 35 A 8/20 μs Surge Current at 125°

文件：1.2109 Mbytes 页数：22 Pages

TI

德州仪器

TVS5800 58V Flat-Clamp Surge Protection Device

1 Features • IEC 61000-4-5 Surge Protection: – 25A (8/20μs) – Clamping voltage: 70.9V at 20A (8/20μs) • Low leakage current: – 6nA typical at 27°C – 50nA typical at 85°C • Low capacitance: 150pF • Integrated IEC 61000-4-2 ESD protection 2 Applications • Power over Ethernet (PoE) • PLC

文件：712.76 Kbytes 页数：14 Pages

TI

德州仪器

33-V Precision Surge Protection Clamp

文件：1.51586 Mbytes 页数：25 Pages

TI

德州仪器

33V 平缓钳位浪涌保护器件

TVS3300 可将高达 35A 的 IEC 61000-4-5 故障电流进行可靠分流，以保护系统免受高功率瞬态冲击或雷击。该器件为满足常见的工业信号线路 EMC 要求提供了解决方案，可通过 42Ω 电阻进行耦合的方式承受最高 1kV IEC 61000-4-5 开路电压。TVS3300 使用独特的反馈机制确保在故障期间发挥精确的平缓钳位能力，保证系统接触电压低于 40V。精确的电压调节允许设计人员放心地选择具有较低电压容差的系统组件，不但减少了系统成本和复杂度，而且不损害可靠性。\n\n此外，TVS3300 还采用 1mm × 1.1mm WCSP 和 2mm × 2mm SON 封装，非常 • 保护特性符合针对工业信号线路的 1kV、42Ω IEC 61000-4-5 浪涌测试要求\n• 关态电压：33V\n• 在 125°C 时，可耐受超过 4,000 次的 30A 8/20µs 浪涌电流的重复冲击\n• IEC61000-4-5 (8/20µs)：35A \n• 低泄漏电流 \n• 85°C 下为 28nA（典型值）\n• 低电容：130pF\n• 集成 4 级 IEC 61000-4-2 ESD 保护;

TI

德州仪器