TUSB211 USB 2.0 High Speed Signal Conditioner

1 Features 1• Compatible with USB 2.0, OTG 2.0 and BC 1.2 • Support for LS, FS, HS signaling • Active Power Consumption of 55 mW (Typical) with 3.3-V Single Supply • Selectable Signal Gain Via External Pulldown Resistor • Does Not Break DP, DM Trace • Scalable Solution – Daisy Chain Device

文件：595.72 Kbytes 页数：20 Pages

TI

德州仪器

Qualified for Automotive Applications

文件：1.17432 Mbytes 页数：21 Pages

TI

德州仪器

TUSB217A USB 2.0 High-Speed Signal Conditioner With DCP and CDP Controllers

文件：4.32538 Mbytes 页数：31 Pages

TI

德州仪器

USB 2.0 480Mbps 高速信号调节器

TUSB211 是一款 USB 高速 (HS) 信号调节器，专为补偿传输通道中的 ISI 信号损失而设计。 \n\n该器件采用了对 USB 低速 (LS) 和全速 (FS) 信号无感知的设计，该设计正在申请专利。LS 和 FS 信号特征不受 TUSB211 的影响。该器件只能对 HS 信号进行补偿。 \n\n该器件具有可编程的信号增益，可精调器件性能，从而对连接器上的高速信号进行优化。这对于通过 USB 高速电气兼容性测试很有帮助。\n\nTUSB211 的封装不会损坏 DP/DM 信号路径的连续性。这样一来，便可以针对完整 USB 通道实现零风险系统设计。\n\n此外，TUSB211 符合 • 与 USB 2.0、OTG 2.0 和 BC 1.2 兼容\n• 支持低速 (LS)、全速 (FS) 和高速 (HS) 信号传输\n• 3.3V 单电源供电运行时的功耗为 55mW（典型值）\n• 可通过外部下拉电阻选择信号增益\n• 不会损坏 DP 和 DM 走线\n• 可扩展解决方案 - 用于高损耗应用的 菊花链器件\n• 紧凑型 1.6mm x 1.6mm QFN 封装;

TI

德州仪器

TUSB211A USB 2.0 480-Mbps High-Speed Signal Conditioner

1 Features • Wide supply voltage range: 2.3 – 6.5 V • Ultra-low USB disconnect and shutdown power consumption • Provides USB 2.0 high-speed signal conditioning • Compatible with USB 2.0, OTG 2.0, and BC 1.2 • Support for low-speed, full-speed, and high-speed signaling • Host or device agno

文件：2.34663 Mbytes 页数：24 Pages

TI

德州仪器

TUSB211A USB 2.0 480-Mbps High-Speed Signal Conditioner

1 Features • Wide supply voltage range: 2.3 – 6.5 V • Ultra-low USB disconnect and shutdown power consumption • Provides USB 2.0 high-speed signal conditioning • Compatible with USB 2.0, OTG 2.0, and BC 1.2 • Support for low-speed, full-speed, and high-speed signaling • Host or device agno

文件：2.35072 Mbytes 页数：25 Pages

TI

德州仪器

TUSB211A-Q1 Automotive USB 2.0 480Mbps High-Speed Signal Conditioner

1 Features • AEC-Q100 qualified for automotive applications – Device temperature grade 2: -40°C to 105°C • Wide supply voltage range: 2.3 – 6.5V • Ultra-low USB disconnect and shutdown power consumption • Provides USB 2.0 high-speed signal conditioning • Compatible with USB 2.0, OTG 2.0, an

文件：2.35057 Mbytes 页数：24 Pages

TI

德州仪器

TUSB211A USB 2.0 480-Mbps High-Speed Signal Conditioner

1 Features • Wide supply voltage range: 2.3 – 6.5 V • Ultra-low USB disconnect and shutdown power consumption • Provides USB 2.0 high-speed signal conditioning • Compatible with USB 2.0, OTG 2.0, and BC 1.2 • Support for low-speed, full-speed, and high-speed signaling • Host or device agno

文件：2.35072 Mbytes 页数：25 Pages

TI

德州仪器

TUSB211A-Q1 Automotive USB 2.0 480Mbps High-Speed Signal Conditioner

1 Features • AEC-Q100 qualified for automotive applications – Device temperature grade 2: -40°C to 105°C • Wide supply voltage range: 2.3 – 6.5V • Ultra-low USB disconnect and shutdown power consumption • Provides USB 2.0 high-speed signal conditioning • Compatible with USB 2.0, OTG 2.0, an

文件：2.35057 Mbytes 页数：24 Pages

TI

德州仪器

TUSB211A USB 2.0 480-Mbps High-Speed Signal Conditioner

1 Features • Wide supply voltage range: 2.3 – 6.5 V • Ultra-low USB disconnect and shutdown power consumption • Provides USB 2.0 high-speed signal conditioning • Compatible with USB 2.0, OTG 2.0, and BC 1.2 • Support for low-speed, full-speed, and high-speed signaling • Host or device agno

文件：2.35072 Mbytes 页数：25 Pages

TI

德州仪器